SONOFF Issues?
-
yes, especially because esp8266 are easier to manage and diagnose problems than nrf24: you get some stats from the web page of the esp8266 that you can't have from other kind of radios, you can have remote debug, quick ota updates and so on. Finally you can have a very cheap relay already boxed. You see I am open to all possibilities according to my needs, if I need to make a sleeping node I'd probably go with nrf24 or rfm69. The nice things about DIY home automation is that you can choose whatever you want and have the controller handle everything.
I second that, I tend to use what is best for ME, not what is best in general. Just like you describe there. I'm about to order some of the SONOFFs to give them a little test, with possibly a memory upgrade and a new firmware uploaded to it. We shall see how they measure up.
-
Agreed, and if you don't like them you haven't wasted too much money and time on building the nodes
why not building up a second network (wifi) - most routers can anyway?
From price perspective, you cannot build a relay node for the same price as you get a sonoff. However it is more fun to build it yourself.
Security: I would not connect a door opener to wifi. but then again, the whole home automation is on the network... it is all a trade between comfort and security. -
why not building up a second network (wifi) - most routers can anyway?
From price perspective, you cannot build a relay node for the same price as you get a sonoff. However it is more fun to build it yourself.
Security: I would not connect a door opener to wifi. but then again, the whole home automation is on the network... it is all a trade between comfort and security.@parachutesj - It would all be behind a very secure router to be honest, i'm over thinking it a little for the sake of lights. I'm attempting to get all the sensors themselves on their own VLAN that is separate to the actual controller anyway so that way even if someone gains control over the lights, they shouldn't be able to modify the controller (theoretically). We will see how that turns out though.
MySensors 2.1.1
Controller - OpenHAB (Virtual Machine)
Gateway - Arduino Mega MQTT Gateway W5100 -
@parachutesj - It would all be behind a very secure router to be honest, i'm over thinking it a little for the sake of lights. I'm attempting to get all the sensors themselves on their own VLAN that is separate to the actual controller anyway so that way even if someone gains control over the lights, they shouldn't be able to modify the controller (theoretically). We will see how that turns out though.
-
@Samuel235 I think you are a little off course: you can't separate sonoff from controller, otherwise they would be isolated.
@gohan - I'm going to be uploading after-market firmware to my SONOFFs and therefor have it communicate to my controller through MQTT.
MySensors 2.1.1
Controller - OpenHAB (Virtual Machine)
Gateway - Arduino Mega MQTT Gateway W5100 -
@gohan - I'm going to be uploading after-market firmware to my SONOFFs and therefor have it communicate to my controller through MQTT.
-
@Samuel235 then your mqtt will have to have 2 network interfaces
-
@Samuel235 I work in IT but I don't have myself a rack with a server running at home 😅
@gohan - Dell R710 over here, brought pretty cheaply in the UK tbh. I have a few things running on it as I'm Microsoft trained and certified so i enjoy messing with that kind of stuff. I was once in that field and attempted to get some work but nothing ever came from it (i got sick of hearing "Sorry, you don't have sufficient work experience") so I've ended up back in University studying mechatronical engineering :( Anyway, that is another topic for discussion, you're welcome to message me anytime for a chat, would be nice :)
