display with RTC showing wrong time

[dayve218]

hey, ive put together the sensor and its showing the wrong time, its currently 7:30pm, and its displaying 8pm.

any ideas?

[hek]

You have to give us some more information about your environment.

Which controller? What does the logs say?

[dayve218]

sorry @hek, im using the vera lite. how do i view the logs?

[RJ_Make]

@dayve218 I believe the RTC time is set @ sketch compilation?

[hek]

The example sketch requests time from Vera at startup. So if you have the wrong time or timezone in Vera things will be wrong in the sensor too.

[dayve218]

@hek im using the example sketch, and the time on my vera seems to be right?

[hek]

What does the serial monitor in IDE say when you have sensor attached to computer?

[dayve218]

@hek
sensor started, id 4
send: 4-4-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 4-4-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
read: 4-1-0 s=255,c=3,t=6,pt=1,l=1:0
read: 4-1-0 s=255,c=3,t=6,pt=1,l=1:0
read: 0-0-4 s=255,c=3,t=6,pt=0,l=2:M
send: 4-4-0-0 s=255,c=3,t=11,pt=0,l=9,st=ok:RTC Clock
send: 4-4-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
send: 4-4-0-0 s=255,c=3,t=1,pt=0,l=3,st=ok:1.0
read: 4-1-0 s=255,c=3,t=1,pt=0,l=3:1.0
read: 4-1-0 s=255,c=3,t=1,pt=0,l=3:1.0
read: 4-1-0 s=255,c=3,t=1,pt=0,l=3:1.0
requesting time
send: 4-4-0-0 s=255,c=3,t=1,pt=0,l=3,st=ok:1.0
read: 4-1-0 s=255,c=3,t=1,pt=0,l=3:1.0
read: 0-0-4 s=255,c=3,t=1,pt=0,l=11:1416699687
Time value received: 1416699687

[hek]

What timezone and time have you set in Vera?

[dayve218]

[hek]

@dayve218 said:

1416699687

You can try converting the timestamp to date here:
http://www.onlineconversion.com/unix_time.htm