Yep. I think it's the default icon that's used when the JSON points to the wrong image, or the image is not available.
Are you using UI7? Can you send me a screenshot of Temperature node? Maybe the XML/JSON behind it? I'd like to compare it to what I'm running.
@samppa - Interesting. I've actually found the 1.4 protocol to be more reliable. (I'm using high-frequency pulse detection for water flow and also valve control) I'm having the sensors send my gateway several times per minute and it never fails.
I've found that powering the Arduino/Radio combination with USB (PC, hub, etc) to not be ideal and always opted for a "wall wart" or my own supply and 5V external regulator. I've always used caps on the 3.3V Radio Supply so I don't have much to compare it with. I'm contemplating going to an ethernet gateway so I can power it with an external source as well. (it's currently being powered by a USB hub connected to Vera)
Just personal experience - it sounds like you've had good luck in the past.
Cheers!
FIXED!!!!
i used I_Arduino1.xml and L_Arduino.lua from development branch and now the plugin its working!!!!
I'll include some sensors and check if everything works
@urbanus in your wiring, did you flip around the leds? (i.e. did you connect the longer pin to the gpio pins instead of to vcc?
With your wiring, are the leds on when there is no traffic?
My guess is that you have reversed the connections. Which is fine, but by default the leds will be on.
