V_LEVEL in Domoticz [resolved]

[YFandS]

and another yes:
from the history:
Changed: MySensors, now treating V_LIGHT_LEVEL as Perecentage (V_LEVEL with type=S_LIGHT_LEVEL = Lux)

regards,
Frank

[alexsh1]

@yfands
@fernando-alvarez-buylla

Any ideas why when the sensor is reporting V_LEVEL/S_LIGHT_LEVEL I still get percentage? I am using the latest beta Domoticz.

[manutremo]

@alexsh1 did you delete the device in the hardware tab of domoticz?

[manutremo]

And it might be necessary to delete the device too.

[alexsh1]

@manutremo I did both. The node has come back, but the device does not display correctly.

[manutremo]

It works for me. Can you show a capture of the device and the sketch? The node log wold be useful too.

[manutremo]

Version of domoticz?

[alexsh1]

@manutremo said in V_LEVEL in Domoticz:

Version of domoticz?

V3.8775

[manutremo]

@alexsh1 Weird... it works perfect in my 3.8770:

So you mean that it the node sends a let's say value of 67, domoticz shows a 67%?

[alexsh1]

@manutremo

Correct.

5091 TSF:MSG:SEND,6-6-0-0,s=255,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=OK:
5138 TSF:MSG:READ,0-0-6,s=255,c=3,t=17,pt=6,l=25,sg=1:9E33298D49F4A46C7EABCD392B5796BA3D5A529489DBB68092
5269 TSF:MSG:SEND,6-6-0-0,s=255,c=3,t=0,pt=1,l=1,sg=1,ft=0,st=OK:100
5382 TSF:MSG:SEND,6-6-0-0,s=1,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=OK:
5427 TSF:MSG:READ,0-0-6,s=255,c=3,t=17,pt=6,l=25,sg=1:B988626FE976407B4B8F037F16F7A061A65EFC53A2A3B9ABF3
5558 TSF:MSG:SEND,6-6-0-0,s=1,c=1,t=38,pt=7,l=5,sg=1,ft=0,st=OK:3.30
abs(lux - oldLux)=9709; lux =9709; oldLux =0
5685 TSF:MSG:SEND,6-6-0-0,s=4,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=OK:
5730 TSF:MSG:READ,0-0-6,s=255,c=3,t=17,pt=6,l=25,sg=1:57745AED2BAB9EED21EC110284CF1456693A42A0E9B775509F
5863 TSF:MSG:SEND,6-6-0-0,s=4,c=1,t=37,pt=0,l=5,sg=1,ft=0,st=OK: 9709

However, it does display as 9709% rather than 9709 lux.
I'll try to delete everything again tomorrow and reboot Domoticz.
Not sure where the issue is as your setup works fine.

[alexsh1]

@manutremo OK, sorted now. What I have done so far:

1. deleted a node and all associated devices
2. rebooted Domoticz
3. reflashed my VELM6075 mote with the same version of MySensors as the GW

It started working straight away.
Thanks

[manutremo]

@alexsh1 Great! Many thanks for reporting back!