[SOLVED] Raspberry PI gateway
-
Hi.
Just install RPi gateway 2.3.0 and add it to Vera
inclusion button inactive - both grey.??
Please help -
install 2.1.1 - same problem
try another Vera - same problem
I have arduino GW on that Vera and it work fine
But no inclusion with RPi
????Found
anvil 2 years ago
Solved - user error 🙂
Inside the Raspberry Pi setup (file /MySensors/examples_linux/mysgw.cpp), the inclusion mode define must be added:
#define MY_INCLUSION_MODE_FEATURE
This is present in the Serial & Ethernet gateway example ino files, just missing from the Raspberry Pi version as it is on GitHub.With this added, the response to the StartInclusion mode request is then received & everything is fine:
TX(fromController) 0;0;3;0;5;1
RX(fromRaspberryPiGateway) 0;255;3;0;5;1
On the plus side, by working this out I'm a lot more familiar with the workings of MySensors!Cheers!
1
-
Found
anvil 2 years ago
Solved - user error 🙂
Inside the Raspberry Pi setup (file /MySensors/examples_linux/mysgw.cpp), the inclusion mode define must be added:
#define MY_INCLUSION_MODE_FEATURE
This is present in the Serial & Ethernet gateway example ino files, just missing from the Raspberry Pi version as it is on GitHub.With this added, the response to the StartInclusion mode request is then received & everything is fine:
TX(fromController) 0;0;3;0;5;1
RX(fromRaspberryPiGateway) 0;255;3;0;5;1
On the plus side, by working this out I'm a lot more familiar with the workings of MySensors!Cheers!
1
