RF Nano = Nano + NRF24, for just $3,50 on Aliexpress

[Mark Swift]

@fruijs I bought them here: https://www.aliexpress.com/item/32980796969.html?spm=a2g0s.9042311.0.0.61584c4dSzvgS3

[Dustin Thurston]

I previously purchased from the exact product link listed by @Mark-Swift and confirmed they are not + models.

[Mark Swift]

@dustin-thurston Mine are certainly plus models, as they connect at 250kbps without issue (nor do they need debug turned on).

[Dustin Thurston]

Can others report their luck? I hate to purchase again and get same result. Especially when seller was non-responsive.

[torfinn]

Hi ! Got a couple of these. Hard to say if its + chip ( but I guess not ). Anyway I am not able to get them running a simple test sketch. Only get RBR:REG=23, VAL=17

[zen85]

@torfinn
i had to set
#define MY_RF24_CE_PIN 10
#define MY_RF24_CS_PIN 9
on mine (definetly not + btw) a while back....

[fruijs]

I just got my order of 3, this time I got the nRF24L01+ version.

[alowhum]

:-D Now I wish I hadn't bought 70 of the old version already.

They're working well though, very happy with them. Great for workshops.

[torfinn]

@zen85 Thanks I got it to work but if I add #define MY_DEBUG_VERBOSE_RF24 i still get RBR:REG=23, VAL=17 filling the console....

[pichaty]

This post is deleted!

[alowhum]

@torfinn These settings should make it work, regardless of which version you buy:

// If you are using an RF-Nano, you have to switch CE and CS pins.
#define MY_RF24_CS_PIN 9                            // Used by the MySensors library.
#define MY_RF24_CE_PIN 10                           // Used by the MySensors library.

// Enable and select radio type attached
#define MY_RADIO_RF24
#define MY_RF24_PA_LEVEL RF24_PA_MAX

// Mysensors advanced settings
#define MY_RF24_DATARATE RF24_1MBPS                 // This datarate is supported by pretty much all NRF24 radios, including the RF-Nano.

[Sherco49]

Hi guys
just a newbie in MySensors, i am buikding my home net with RF24 radio.
Just received 4 of this rf-nano (+ chip) and set one into relay device
With my Wemos D1mini pro + NRF24L01 +PA+LA gateway, it works in my whole (relatively large) house (approx 30m through a lot of walls and armed floor).
Really handy for small boxes projects, the missing functionality is the interrupt pin not (easily ?) accessible for battery powering

[Sherco49]

I continue my test with this chip, and solved an issue in declaring children of a node

I tried the relay actuator with 2 relays, the second one never wanted to get an ACK message for the presentation message
I tried with 3 children relays , first is ACK, second still NACK and 3rd .... ACK again !

Even if it was not my first thought, i finally insert a wait(1000) between each present line which solved the problem

hope it can help

[echi]

You might be interested by the board I've designed. Not "RF Nano" but "RF Pro Mini". Of course you need a "USB to serial" programmer but it directly runs on batteries.
See here and here.

[martim]

@echi Where could you order this board?

[TheoL]

@martim Just search for RF Nano on Aliexpress. Haven't looked for the cheapest one, just the first that says LRF24L01+. Although not certain if it is really a + version of the NRF24L01.

This is one on Aliexpress

[ncollins]

@martim I think this is a better alternative: https://www.electrodragon.com/product/nrf24duino-arduino-mini-plus-nrf24l01-board/

[TheoL]

@ncollins That is a nice board indeed. I haven't checked because I will order some things after dinner. For me it is a must to keep the arduino Nano footprint. So I can replace the nano and nrf in some of the projects I already built.

[martim]

@TheoL I meant the board of @echi here as I need battery power board and this seems to be working well.

[martim]

@ncollins If this board is suitable for battery use? I don't see how much current it uses.