Domoticz Beta for MySensors official support?

[kunall]

@jeylites After success with OpenHab, I wanted to give a try to Domoticz. Lets see how it goes. I will keep you updated!

[raditv]

@kunall which sketch did you use for relay with button? did you modify the sketch?

[kunall]

@raditv I used the default sketch given in examples for Relay actuator on mysensors. I checked my ethernet gateways debug log, it seems that its not receiving any command from Domoticz at all.

[raditv]

I see, I never check ethernet script for domoticz, maybe there's a bugs there. I'll check it anyway. but if you try serial gateway, it will run

[kunall]

@raditv Yeah, let me know if you face any issues with ethernet gateway. I will give a try to serial gateway, right now!

[kunall]

@hawk_2050 I had few crashing issues today when I installed from source code. It ran fine for a while, got me excited and then started crashing. So I went ahead and installed from stable binary. So far no issues except I can not turn on/off light from the UI. Not sure if its the ethernet gateway issue or domoticz'.

[kunall]

@raditv @hek I can confirm that the Light turns on/off with Serial gateway. Just tried it and it works. However it does not work with ethernet gateway sketch. Any solution to make it work with ethernet?

[kunall]

@blacey Are you running Serial or Ethernet gateway for Domoticz?

[tbowmo]

I've installed monit, to keep an eye on my domoticz install, It restarts it automaticly if it crashes.

I'm using serial GW for mine, and only have 2 Sensors (mysensors micro type) connected at the moment. (and some virtual presence detection "sensors" running on my router.

[raditv]

if you dont want to install anything to restart domoticz when it's crash. you can put crontab to check it with bash script like this

put this on your cront :

*/1 * * * * sudo /opt/Domoticz/scripts/online_check.sh 2>&1 >> /dev/null

and this is online_check.sh

#!/bin/bash
#Title check_domoticz_online.sh
# check domoticz
sudo service domoticz.sh status
# if not found - equals to 1, start it
if [ $? -eq 1 ]
then
sudo service domoticz.sh restart
else
echo "Domoticz running - do nothing"
fi