Domoticz Beta for MySensors official support?
-
@blacey Thanks!! I followed your instruction. Works great. It detected some of my sensor noted out of the box. However, I'm not sure how to send a command to Turn On/Off light? It is asking me Action ON and Action OFF like shown here:
-
@kunall which light do you want to turn on/off? mysensors based? or zwave or anothers?
and anyway On Action/Off action it's only an additional query, for example when you turn on/off the light you want to open some url or script then you have to put your url/script there. but it's better for you to use LUA script for automation.@raditv @AWI Thats what I thought about On/Off action. I'm trying to on/off mysensors relay actuator. My relay actuator has a physical button. Domoticz detects my relay actuator and also updates the state if I toggle the physical button. But it does not turn on / off the relay actuator from domoticz UI. Any idea why?
Here is my Domoticz log
-
@blacey I didn't know you into Domoticz.
What's up @kunall....I will like to see where this project goes from a user perspective.
-
I see, I never check ethernet script for domoticz, maybe there's a bugs there. I'll check it anyway. but if you try serial gateway, it will run
-
@blacey, I also built and installed from the head of the Domoticz trunk a few days ago on my Raspberry Pi 2. Although it runs initially after a few minutes the web server side of the application crashes and burns. Have you experienced anything like that when running it on your Pi 2?
Cheers
Richard@hawk_2050 I had few crashing issues today when I installed from source code. It ran fine for a while, got me excited and then started crashing. So I went ahead and installed from stable binary. So far no issues except I can not turn on/off light from the UI. Not sure if its the ethernet gateway issue or domoticz'.
-
I see, I never check ethernet script for domoticz, maybe there's a bugs there. I'll check it anyway. but if you try serial gateway, it will run
-
-
I've installed monit, to keep an eye on my domoticz install, It restarts it automaticly if it crashes.
I'm using serial GW for mine, and only have 2 Sensors (mysensors micro type) connected at the moment. (and some virtual presence detection "sensors" running on my router.
-
if you dont want to install anything to restart domoticz when it's crash. you can put crontab to check it with bash script like this
put this on your cront :
*/1 * * * * sudo /opt/Domoticz/scripts/online_check.sh 2>&1 >> /dev/nulland this is online_check.sh
#!/bin/bash #Title check_domoticz_online.sh # check domoticz sudo service domoticz.sh status # if not found - equals to 1, start it if [ $? -eq 1 ] then sudo service domoticz.sh restart else echo "Domoticz running - do nothing" fi
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login