UV Sketch use pin A0 or 3?
-
Hello,
Building my first project using the UV example sketch. (rebuild of my broken cresta UV sensor in the same housing)
In the wiring things up table pin 3 is showed as out (http://www.mysensors.org/build/uv)
But in the sample sketch i see in the first lines of code, out >>> A0 >>>Can someone explain which one is the right pin to get a correct output?
I like Mysensors a lot btw!!
Thanks in advance,
Edwin
-
@edweather said:
The documentation on site is wrong. A0 is the correct pin. Thanks for reporting, I'll update.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login