Project boxes for MySensor's nodes and gateway?
-
I'm starting to think I'll need a 3D printer after all.... Any recommendations on which one to get?
-
Thanks. I looked into it this morning. I guess pre-built boxes are what's best for me. A simple black box like this or similar will probably do the job:
-
@Dheeraj: Where did this case come from ? Was the board inside custom made or pro mini ?
@GertSanders purchased it from ebay, yes inside it is mini pro and nrf radio module ..
-
Thanks. I looked into it this morning. I guess pre-built boxes are what's best for me. A simple black box like this or similar will probably do the job:
-
I've got a few of these with 2xAAA, Arduino pro + radio + DS18b20 crammed into them
@mvdarend has my vote though... much cheaper and fun
-
I've got a few of these with 2xAAA, Arduino pro + radio + DS18b20 crammed into them
@mvdarend has my vote though... much cheaper and fun
@blackdog65 said:
I've got a few of these with 2xAAA, Arduino pro + radio + DS18b20 crammed into them
@mvdarend has my vote though... much cheaper and fun
Good find.
3x AA seems like magic number to aim for. It gets you 4.5v, so you can run directly from battery with no divider.
-
@epierre said:
My Gateway:
A Gateway and a node for a friend:
Comparison of the MysenSor and the famous RFXTRX:
And the solar powered+LiPo water proof box:
What kind of box is that? Do you have a link where i can order these?
-
Hello!
I ordered these boxes. http://www.aliexpress.com/item/small-plastic-project-box-electronics-LED-junction-housing-10-pcs-73-36-24mm-plastic-enclosure-for/32244686811.html
They have a nice design and are very small. I fit 2AA batteries, arduino pro mini and an nrf24 inside the box. It's a tight fit! you have to cut some plastic away from the battery holder and also remove the pins from the nrf module. But the result looks very professional. :)
Price is also very good!So far I use them for door / window sensors.
-
Hello!
I ordered these boxes. http://www.aliexpress.com/item/small-plastic-project-box-electronics-LED-junction-housing-10-pcs-73-36-24mm-plastic-enclosure-for/32244686811.html
They have a nice design and are very small. I fit 2AA batteries, arduino pro mini and an nrf24 inside the box. It's a tight fit! you have to cut some plastic away from the battery holder and also remove the pins from the nrf module. But the result looks very professional. :)
Price is also very good!So far I use them for door / window sensors.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login