MySensors 1.5.2 Released

Anticimex

We are happy to announce a maintenance release of MySensors library to 1.5.2!

This version is backward compatible with 1.5.1 and contain security related bugfixes and stabilizations:

Backport of bugfix (#259) in repeaters when forwarding signed messages
Prevent SecureActuator from accepting ACKs as commands
Make sure nodes not supporting signing informs gateway
Fixes addressing bug in _doSign bitfield
Stabilizes Jenkins

It is recommended that you update all your nodes and gateways if you use message signing.

n3ro

yeah!

is it possible to update the gateway via shell?

Anticimex

How do you mean 'via shell'? Using avrdude it is possible to flash the built hex file via a shell yes. But I don't know the exact arguments for that.

n3ro

@Anticimex like homeduino with:

sudo apt-get install arduino-core avr-libc avrdude binutils-avr gcc-avr libconfig-yaml-perl libftdi1 libyaml-perl screen python-serial
git clone --recursive https://github.com/pimatic/homeduino.git
make upload

Anticimex

Well, that is up to you. It depends on the HW you have used for your GW. The library is just software and how you choose to download that SW to your HW is entirely up to you :) This is a SW release, so you can flash it exactly as you flashed it before, or in a new way if you prefer that. But the method of flashing is totally decoupled from the contents of release 1.5.2.
And when it comes to OTA updates, there are no changes in this release compared to 1.5.1 so you can expect the same featureset with respect to OTA functionality.

korttoma

How can I do the following on this Library version?

#define MY_NODE_ID 12
#define RF24_CE_PIN		4	
#define RF24_CS_PIN		10	
#define RF24_PA_LEVEL	RF24_PA_MAX

MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL);

MySensor (transport);


void setup()
{             gw.begin(NULL, MY_NODE_ID);

Cant seem to wrap my head around this. btw, I'm using Codebender.

Anticimex

There is no difference in how you write your sketch in 1.5.2 compared to 1.5.1. So I am not sure I understand your question.

korttoma

Whell a sketch used to compile just fine using 1.5 but now I get:

In file included from (sketch file) MultiTemp.ino:39:
(personal library file) MySensors/MySensor.h:158:70: error: unknown type name 'MyHwDriver'
MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
^
(sketch file) MultiTemp.ino:71:10: error: redefinition of 'transport' with a different type: 'MySensor' vs 'MyTransportNRF24'
MySensor(transport);
^
(sketch file) MultiTemp.ino:69:18: note: previous definition is here
MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL);

Anticimex

If you skipped on 1.5.1 and went from 1.5 to 1.5.2 I think @hek needs to fill you (and me) in on what changes has been made.

korttoma

Btw, I just upload the MySensor folder from the library as a .zip to codebender. Do I need anything outside this folder?

Anticimex

I don't think so. Perhaps it helps to re-download the image. Which link did you use? The zip link to 1.5.2 is here.

hek

Github is the best place. I have a vague memory of routing problems fixed in 1.5.1.
https://github.com/mysensors/Arduino/releases

korttoma

Tried to get the Lib again but it does not seem to be any different:

Trying to compile the sketch (coodiebender.something/sketch:213307) unchanged results in this:

In file included from (sketch file) MultiTemp.ino:35:
(personal library file) MySensors/MySensor.h:158:70: error: unknown type name 'MyHwDriver'
        MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
                                                                            ^
(sketch file) MultiTemp.ino:63:10: error: no matching constructor for initialization of 'MySensor'
MySensor gw(transport);

So I remove the "gw" but it stil complains:

(personal library file) MySensors/MySensor.h:158:70: error: unknown type name 'MyHwDriver'
        MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
                                                                            ^
(sketch file) MultiTemp.ino:63:11: error: redefinition of 'transport' with a different type: 'MySensor' vs 'MyTransportNRF24'
MySensor (transport);

I'm just not doing it right that is all, but how should it be done?

Anticimex

Have you looked at one of the existing examples as a reference? For example the DallasTemperatureSensor.ino

korttoma

The examples do not include a transport definition

korttoma

Is there "SOMETHING" missing like this??

MySensor gw(transport, SOMETHING);

candidate constructor not viable: requires 2 arguments, but 1 was provided
        MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()

How do I define "MyHwDriver"??

Anticimex

Have a look at this example

korttoma

Thanks for the example @Anticimex now I know how but it is stil not working when using codebender.

(personal library file) MySensors/MySensor.h:158:70: error: unknown type name 'MyHwDriver'
        MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
                                                                            ^
(sketch file) MultiTemp.ino:66:1: error: unknown type name 'MyHwATMega328'
MyHwATMega328 hw; // Select AtMega328 hardware profile

I tested now with Arduino IDE 1.6.5 and my sketch compiles just fine.

Anticimex

Sorry, I am not very familiar with codebender. It looks to me that the library you try to build with is very out if date if it lacks those hw definitions. I don't know how the library ends up at codebender. Perhaps @hek has some communication with them to support it.

carlierd

Hello,

I tried to compile with 1.5.2 and got these errors:



/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp: In member function 'boolean MySensor::sendRoute(MyMessage&)':
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:27:25: error: '_doSign' was not declared in this scope
 #define DO_SIGN(node) (~_doSign[node>>3]&(1<<(node%8)))
                         ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:356:6: note: in expansion of macro 'DO_SIGN'
  if (DO_SIGN(message.destination) && message.sender == nc.nodeId && !mGetAck(message) && mGetLength(message) &&
      ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp: In member function 'boolean MySensor::process()':
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:28:25: error: '_doSign' was not declared in this scope
 #define SET_SIGN(node) (_doSign[node>>3]&=~(1<<(node%8)))
                         ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:670:6: note: in expansion of macro 'SET_SIGN'
      SET_SIGN(msg.sender);
      ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:29:27: error: '_doSign' was not declared in this scope
 #define CLEAR_SIGN(node) (_doSign[node>>3]|=(1<<(node%8)))
                           ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:673:6: note: in expansion of macro 'CLEAR_SIGN'
      CLEAR_SIGN(msg.sender);
      ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:27:25: error: '_doSign' was not declared in this scope
 #define DO_SIGN(node) (~_doSign[node>>3]&(1<<(node%8)))
                         ^
/Users/carlierd/Arduino/libraries/MySensors/MySensor.cpp:682:40: note: in expansion of macro 'DO_SIGN'
      if (signer.requestSignatures() && DO_SIGN(msg.sender))
                                        ^
Erreur lors de la compilation.

No compilation issue with 1.5. And everything is working perfectly.

David.

MySensors 1.5.2 Released

16

12.0k

11.2k

113.4k