Gateway MQTTClient and Mosquitto debug

[AndrewZ]

Hello everyone!

Just installed Mosquitto on RPi and I've adapted GatewayW5100MQTTClient example to use the ENC28J60 module I have. Should it work, BTW?

Mosquitto seems to be working, but I cannot get any debug from it... So I'm curious how can I check that my Gateway is talking with Mosquitto?

Thank you!

[hek]

We're using the pubsubclient library which doesn't support the ENC28J60 module according to the documentation
https://github.com/knolleary/pubsubclient

They instead they suggest using NanodeMQTT for the ENC-module
https://github.com/njh/NanodeMQTT

But I haven't tried it or adopted MySensors for using that library. Guess it would require some tweaking to get it in.

[AndrewZ]

@hek , thanks for that. I'll try again once I get another module.

Andrew

[AndrewZ]

I'm now using W5100 Ethernet, this is what I have on startup:

0;255;3;0;9;Starting gateway (R-NGA-, 2.0.0-beta)
0;255;3;0;9;Init complete, id=0, parent=0, distance=0
0;255;3;0;9;Attempting MQTT connection...
0;255;3;0;9;MQTT connected

With the following request I was able control my 1st relay:
mygateway1-in/0/1/1/0/2 , value is either 0 or 1

Seems to be working!