@andriej
Hi, I had problem using the main branch mysensors/Raspberry, that because of the bit-field struct (header_s) in Sensor.h They will get packed in different order on the arduino compared to the RPi (at least with my compiler, gcc). In order to fix this I created the 1.4dev branch. It uses full bytes instead of the bit-fields, but you need (of cause) to compile both the sensors (arduino) and the gateway (RPi) using the 1.4dev branch.
We need to fix this in the main branch later on (and use the same files as in mysensors/Arduino/libraries/MySensors)
Thanks for the offer @TheoL ! I have moved on to a differenct project. Also, a lesson that I have learned many times, "If it works, don't fix it!"
-OSD
@Shirkit I agree. I have a lot of unifinished projects. Most of them still on breadboards. But as we will do a big reno on the house I need to finish them. Pretty sure I wouldn't be able to figure out how they worked if I store them in boxes during the reno. I have some light projects, A garden controller just an improved version of what was posted many years ago. And some more generic things that are probably not interesting to most people. And I also have a hub node the allows you to use cheap rf modules from AliExpress to control rooms very easy. I transformed a for channel remote module to a 15 button remote.
Without this site I wouldn't be able to keep making MySensors stuff
For me almost all I need is in Master. For some nice to haves I have some custom libraries, like a message and a presentation queue. The only wish I have is dual led support.
