Trying to upgrade my Ethernet GW -> 1.4

[Hoffan]

@hek

Hope i understand right 1.0.5 on MAC

[hek]

Could you give a try with 1.5.5(+)?

[Hoffan]

@hek

Yes i will, BRB

[Hoffan]

I only find 1.5.7 beta No 1.5.5

the only non beta i find is 1.0.5

[hek]

Go for 1.5.7.

[klim]

Today i compiled it serveral times with IDE 1.0.5 under windows without a problem. And after some time i got exact the same error message as you. So i decited to use 1.5.7 beta to compile, there are some other ugly compiling messages, but at the end it was successfull for me.

[Hoffan]

@klim

Yes i see the same message here, But i think i get it to work rikght now..

[Hoffan]

I get it to work to program my Gateway, But
nothing happens when i put the start button for inclusion new sensors

And i have pure the new files into my Vera and i have Ui5 on that one

The GW seriel log looks like this all the time

0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=fail:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=fail:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=fail:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=ok:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=fail:0

[Hoffan]

@hek

Do you have any solutions for my problem??

I have seen that i lost ping when i try to ping the gateway
it work to ping when i restart the GW but if i test for ex 10 minutes later it don't work

[Hoffan]

Should it looks like this. Why is Lib version empty..

[hek]

Two threads with the same problem:

http://forum.mysensors.org/topic/371/errors-compiling-ethernetgateway-with-uipeternet-h

Lib is empty because your Vera plugin is unable to communicate with the ethernet gateway.

[mitekg]

Hi, got some problems wth ethGW (wiznet + uno)
latest version from git is not for me (no blinks and eth communication with vera)
but old dev version http://pastebin.com/6YFrs6HT works fine. could someone help me plz.

thx

[mitekg]

add: blinks and inclusion starts and stops works fine (with old version), but no lib version and new devices in vera after that

[Hoffan]

What ethernet module do you have?

[mitekg]

@Hoffan - wiznet