Senserbender Humidity Value Error
-
Built up a senserbender board with radio and using the example script I get the temp device and humidity devices - temp looks correct but humidity is reporting 1107296283 % anyone else have this working correctly?
-
Built up a senserbender board with radio and using the example script I get the temp device and humidity devices - temp looks correct but humidity is reporting 1107296283 % anyone else have this working correctly?
-
Dwalt - you hit the nail on the head.
I was not able to get the dev branch of the ESP Wifi gateway to build per the link you sent.
but I modified the senserbendermicro example to change the all of the "int" to "float" for the humidity readings and I am getting the correct readings now.
In the example the Temperature variables are all float types so the temp readings were working correctly.+1 to you.
Hek - i have a 5v 2A wall wart powering the esp. it was reporting the high value right from the start due to the 2 byte int to 4 byte int conversion in the ESP.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login