💬 AC-DC double solid state relay module

[folkestorp]

@Boots33 Will you please upload your complete code. It is difficult to see the finale solution then I read all the posts.

[Boots33]

@folkestorp I have no node to try it on but the code will look like this. perhaps you can test it and let us know if it works. I have just placed it in the original code of a few posts up

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Script for double SSR relay board by Aproxx
 * https://www.openhardware.io/view/77/AC-DC-double-solid-state-relay-module
 * https://forum.mysensors.org/topic/3671/ac-dc-double-solid-state-relay-module
 * Control 2 circuits either from controller or from physical buttons connected on pins 4 & 7
 * Optional DS18b20 is connected on pin 8
 * 
 *  HISTORY :
 * xx/xx/2016 original version by Aproxx
 * 08/02/2016 upgraded to MySensors 2.0 by mr_const
 * 08/30/2016 changes by Nca78 :
 *        - fixed initialization of physical buttons/debouncer status
 *        - centralized pin status change for relays in setRelayState method
 *        - centralized debug information for state changes in one method + added debug info when changed by physical switches
 *        - added #ifdef MY_DEBUG before each Serial.print (saves prog memory when not in debug mode) and F() macros for debug strings (saves RAM when in debug mode)
 *        - added #define USE_TEMP_SENSOR to make temperature sensor optional (not used if line is commented)
 *        - put back #define for repeater feature
 *        - add #define TEMPERATURE_ROUNDING for custom temperature rounding
**/

// MySensor Debug
//#define MY_DEBUG

// Enables repeater functionality (relays messages from other nodes)
//#define MY_REPEATER_FEATURE

// Comment line below if you don't want to use the temperature sensor
#define USE_TEMP_SENSOR
#define MY_TRANSPORT_WAIT_READY_MS 3000     //set how long to wait for transport ready.
#define MY_RADIO_NRF24
#include <MySensors.h>
#include <SPI.h>
#include <Bounce2.h>

#define RELAY_PIN    3  // Arduino Digital I/O pin number for relay 
#define RELAY_PIN_2  5
#define BUTTON_PIN   4  // Arduino Digital I/O pin number for button 
#define BUTTON_PIN_2 7

#define CHILD_ID 8 // Id of the sensor child for 1st relay
#define CHILD_ID_2 9 // Id of the sensor child for 2nd relay

// Relay status
#define RELAY_ON 1
#define RELAY_OFF 0

// Source of state change (used when printing debug information)
#define CHANGE_STATE_SOURCE_RADIO 0
#define CHANGE_STATE_SOURCE_SWITCH 1


// Temperature sensor definitions
#ifdef USE_TEMP_SENSOR
#include <OneWire.h>
#include <DallasTemperature.h>
#define ONE_WIRE_BUS 8
#define CHILD_DSB_ID 13 // Id of the sensor child for temperature sensor
#define TEMPERATURE_ROUNDING 10.f   // Change value to change rounding of temperature value: 10.f for 0.1°C change, 5.f for 0.2°C change, 2.f for 0.5°C change
#endif



Bounce debouncer = Bounce();
int oldValue;
bool state;
Bounce debouncer2 = Bounce();
int oldValue2;
bool state2;

MyMessage msg(CHILD_ID, V_LIGHT);
MyMessage msg2(CHILD_ID_2, V_LIGHT);

#ifdef USE_TEMP_SENSOR
MyMessage msgTemp(CHILD_DSB_ID, V_TEMP);
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire); // Pass the oneWire reference to Dallas Temperature.
#endif

void presentation() {
  // Send the sketch version information to the gateway and Controller
  sendSketchInfo("Double Relay & Button", "0.2");
  // Register all sensors to gw (they will be created as child devices)
  present(CHILD_ID, S_LIGHT);
  present(CHILD_ID_2, S_LIGHT);
#ifdef USE_TEMP_SENSOR
  present(CHILD_DSB_ID, S_TEMP);
#endif
}

void setup()
{
#ifdef USE_TEMP_SENSOR
  sensors.begin();
  sensors.setWaitForConversion(false);
#endif

  // Setup the button
  pinMode(BUTTON_PIN, INPUT);
  // Activate internal pull-up
  digitalWrite(BUTTON_PIN, HIGH);

  // Setup the button
  pinMode(BUTTON_PIN_2, INPUT);
  // Activate internal pull-up
  digitalWrite(BUTTON_PIN_2, HIGH);

  // After setting up the button, setup debouncer
  debouncer.attach(BUTTON_PIN);
  debouncer.interval(5);

  debouncer2.attach(BUTTON_PIN_2);
  debouncer2.interval(5);

  // Set the initial values of oldValue/oldValue2 variables from status of physical switches
  //  if this is not done the loop() will detect status change and switch the relays on or off
  debouncer.update();
  debouncer2.update();
  oldValue = debouncer.read();
  oldValue2 = debouncer2.read();


  // Make sure relays are off when starting up
  setRelayState(RELAY_PIN, RELAY_OFF);
  // Then set relay pins in output mode
  pinMode(RELAY_PIN, OUTPUT);

  digitalWrite(RELAY_PIN_2, RELAY_OFF);
  // Then set relay pins in output mode
  pinMode(RELAY_PIN_2, OUTPUT);

  // Set relay to last known state (using eeprom storage)
  state = loadState(CHILD_ID);
  setRelayState(RELAY_PIN, state);

  state2 = loadState(CHILD_ID_2);
  setRelayState(RELAY_PIN_2, state2);
}


/*
   Example on how to asynchronously check for new messages from gw
*/
void loop()
{
#ifdef USE_TEMP_SENSOR
  static float prevTemp = 0;
#endif

  debouncer.update();
  debouncer2.update();
  // Get the update value
  int value = debouncer.read();
  int value2 = debouncer2.read();

  if (value != oldValue) {
    state =  !state;                                                  // Toggle the state
    send(msg.set(state), false);                          // send new state to controller, no ack requested
    setRelayState(RELAY_PIN, state);                // switch the relay to the new state
    saveState(CHILD_ID, state);        // Store state in eeprom
    // Write some debug info
    printStateChangedDebug(CHANGE_STATE_SOURCE_SWITCH, CHILD_ID, value);
    oldValue = value;
  }
  

  if (value2 != oldValue2) {
    state2 =  !state2;                                         // Toggle the state
    send(msg2.set(state2), false);                 // send new state to controller, no ack requested
    setRelayState(RELAY_PIN_2, state2);     // switch the relay to the new state
    saveState(CHILD_ID_2, state2);     // Store state in eeprom
    // Write some debug info
    printStateChangedDebug(CHANGE_STATE_SOURCE_SWITCH, CHILD_ID_2, value2);
    oldValue2 = value2;
  }
  

  // Fetch temperatures from Dallas sensors
#ifdef USE_TEMP_SENSOR
  sensors.requestTemperatures();
  // Fetch and round temperature to one decimal
  float temperature = static_cast<float>(static_cast<int>(sensors.getTempCByIndex(0) * TEMPERATURE_ROUNDING)) / TEMPERATURE_ROUNDING;

  if (temperature != -127.00f && temperature != 85.00f && prevTemp != temperature) {
    // Send in the new temperature
    send(msgTemp.set(temperature, 1));
#ifdef MY_DEBUG
    Serial.print("Sent temperature: ");
    Serial.println(temperature);
#endif
    prevTemp = temperature;
  }
#endif
}

void receive(const MyMessage &message) { 
if (message.type == V_STATUS) {
 switch (message.sensor) {
  case CHILD_ID:    
    state = message.getBool();          // Change relay state
    setRelayState(RELAY_PIN, state);    
    saveState(CHILD_ID, state);        // Store state in eeprom
    // Write some debug info
    printStateChangedDebug(CHANGE_STATE_SOURCE_RADIO, CHILD_ID, state);
    break; 
  case CHILD_ID_2:
    state2 = message.getBool();
    setRelayState(RELAY_PIN_2, state2);
    saveState(CHILD_ID_2, state2);     // Store state in eeprom
    // Write some debug info
    printStateChangedDebug(CHANGE_STATE_SOURCE_RADIO, CHILD_ID_2, state2);
    break;
  }
 }
}



// Set status of a relay pin
void setRelayState(byte relayPin, bool value) {
  digitalWrite(relayPin, value ? RELAY_ON : RELAY_OFF);
}

// Print debug info, centralized in one place to minimize memory usage and have only one #ifdef MY_DEBUG for all state change messages
void printStateChangedDebug(int source, int sensorID, bool value) {
#ifdef MY_DEBUG
  Serial.print(F("Sensor value changed, source="));
  Serial.print(source == CHANGE_STATE_SOURCE_RADIO ? F("Radio") : F("Physical switch"));
  Serial.print(F(", Sensor="));
  Serial.print(sensorID);
  Serial.print(F(", New status: "));
  Serial.println(value);
#endif
}

[folkestorp]

@Boots33 I have test your code without temp sensor. It works perfect. Thank you!!!

[Boots33]

@folkestorp great. Thanks for reporting back.

[XerOps]

I got a problem. I connected the board directly to ä powersource but the adapter doesnt output 5V . The part before just output 230 v just fine. Any one has any sugestions on whatsapp im missing?

[Nca78]

@XerOps do you have 230V on the input pins of the HLK ?

[XerOps]

@Nca78 Well yeah, trough a completly soldered board tough, with both fuses and the varsisitator.

[laucarlier]

Hi,

Many thanks for sharing this project!

Is this also possible to post a picture of the other side of the PCB in order to get a better idea on how the Arduino is soldered?

Kind regards,

[tonnerre33]

@laucarlier said in 💬 AC-DC double solid state relay module:
Hello, i have posted fiew pictures here : http://www.photorapide.com/albums/jordan/khreln/ac-dc-double-solid-state-relay-module.html

[laucarlier]

@laucarlier

Hi Tonerre33,

Thanks a lot for sharing the picture of your project!

I really like the idea of the way you put the PSU and the arduino so that you win a lot of space!

Kind regards,

[rzylius]

Hi,

it is very cool project. I assembled one but when I test it this is what I get:

16:18:39.980 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:READ,101-101-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
16:18:39.981 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:BC
16:18:39.982 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:FPAR REQ,ID=101
16:18:39.985 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:PNG:SEND,TO=0
16:18:39.988 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:CKU:OK
16:18:39.993 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:GWL OK
16:18:40.963 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;Will not sign message for destination 101 as it does not require it
16:18:41.004 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;!TSF:MSG:SEND,0-0-101-101,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
16:18:41.010 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:READ,12-12-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
16:18:41.013 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:PINGED,ID=12,HP=1
16:18:41.018 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;Skipping security for command 3 type 25
16:18:41.029 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:SEND,0-0-12-12,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=OK:1
16:18:44.038 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:READ,101-101-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
16:18:44.039 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:BC
16:18:44.040 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:FPAR REQ,ID=101
16:18:44.041 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:CKU:OK,FCTRL
16:18:44.044 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;TSF:MSG:GWL OK
16:18:44.974 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;Will not sign message for destination 101 as it does not require it
16:18:45.016 [DEBUG] [orsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;!TSF:MSG:SEND,0-0-101-101,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0

I guess it shows that radio has unreliable power. Please advise how should I debug?

regards

[rzylius]

The problem dissapeared when I changed 4.7uf capacitator to 47uf. works great!

[rzylius]

Where to find a sketch with temperature read?

[mfalkvidd]

@rzylius could you be a bit more specific? Do you want a way to read the temperature of the solid state relay?

[tonnerre33]

@rzylius https://forum.mysensors.org/topic/3671/ac-dc-double-solid-state-relay-module/197

[SensibleHeat]

Hello,

Thank you for sharing this project. I have built it and am testing it on my outdoor lights.
.
I have three issues I can't seem to figure out and am hoping others may have had similar problems and figured out a fix.

First some background. I built a double relay board and have 120V 60 hz power. I am controlling it through MyNodes 2.0. I am using an unedited version of the source code. My networks includes about 7 other nodes that are only measuring temperature. Half of them are set up to be repeater nodes. I was suspicious that I may be getting interference from the other nodes causing the problem but have had the same problems with the other nodes disabled.

Here are the issues I am trying to fix.

1. I am finding that the relays will not stay in the position they are controlled to be in. Mostly they close when controlled to be open but also they are opening when controlled to be closed.
2. When in a closed state relay 1 flickers every few minutes. I have replaced this relay and still have the same issue.
3. The hardwired switch control isn't working for me work. The switch only causes a flicker in the lights.

Any suggestions? For me Half of the fun in the projects is trouble shooting and making them work. I'll send updates on any fixes I come across.

[zombiee77]

Hi and Thank you for the Board!!!

My question is, kann I user an usual old fashioned Light switch or must I buy a push button??

[zombiee77]

@nca78
I used the code and it worked well with the remote control.-
I can switch a LED (for testing purposes attached instead of a SSR) on and off.
If I want to switch the LED with a push button I fail.

This is what I have changed:

#define RELAY_PIN 4 // Arduino Digital I/O pin number for relay
#define RELAY_PIN_2 5
#define BUTTON_PIN 3 // Arduino Digital I/O pin number for button
#define BUTTON_PIN_2 7

And this is the serial output I get, after I press the button:

This is an ack from gateway
1107867 TSF:MSG:SEND,10-10-0-0,s=111,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:1
Sensor value changed, source=Physical switch, Sensor=111, New status: 0
1107877 TSF:MSG:READ,0-0-10,s=111,c=1,t=2,pt=1,l=1,sg=0:1
1107888 TSF:MSG:ACK
This is an ack from gateway
1108520 TSF:MSG:SEND,10-10-0-0,s=111,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:1
Sensor value changed, source=Physical switch, Sensor=111, New status: 1
1108531 TSF:MSG:READ,0-0-10,s=111,c=1,t=2,pt=1,l=1,sg=0:1
1108541 TSF:MSG:ACK
This is an ack from gateway

[joaoabs]

Hi,
Any particular reason for the values of the thermal cut-offs? (73ºC, 10A)?
This temperature (73ºC) makes it difficult to solder, I've burned a couple when trying to solder it... And why 10A? Shouldn't we get a lower current? I know the other fuse is limiting the current to 0.2A, but if we have a lower current on this one we may get cheaper components... Wouldn't this one, for instance, do the same function? https://www.ebay.com/itm/10-Pcs-Fuji-Microtemp-Thermal-Fuse-115-TF-Cutoff-1A-250V-New/322657006381

If the PCB is inside a box, without any lossen wires, couldn't we limit the temperature to a sliglhly higher value (115ºC)?

Thanks

[Nca78]

Hello @joaoabs,

I think it is based on measurements here :
https://lygte-info.dk/review/Power Mains to 5V 0.6A Hi-Link HLK-PM01 UK.html

As you can see when he tests at full load (0.6A) for a long time, max temperature is a bit over 60°C. So temperature should not be too much higher than that if you want to detect abnormal overheating. 115° is higher than what is measured at the hottest point on the top of the enclosure after 15mn overloading at twice the maximum load, so I don't think it's safe to use a temp fuse that high.

For the max current there might be a short inrush current when switching on, so 1A could be a bit low (and that's why the other fuse is a slow blow fuse), but feel free to try and report :)