UI5 Mysensors library 2.0 gateway issues
-
@rchamp i'm not sure about the DHT's inclucion but you're right about the wrong library version.
This version is NOT updated. If i trace down the debug i notice that the version ID string is not sent to the GW.
Well at least not correct0;255;3;0;9;Starting gateway (RNNGAS, 2.0.0) 0;255;3;0;9;TSM:INIT 0;255;3;0;9;TSM:RADIO:OK 0;255;3;0;9;TSM:GW MODE 0;255;3;0;9;TSM:READY 0;255;3;0;14;Gateway startup complete. 0;255;0;0;18;2.0.0 0;255;3;0;9;No registration required 0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1This can be the lirbrary version number but is has 18 as internal message ID (I_HEARTBEAT)
0;255;0;0;18;2.0.0
While i would expect 2 (I_VERSION) so this message
0;255;0;0;2;2.0.0@BartE said:
0;255;0;0;18;2.0.0
This is a presentation message not an internal message. It's presenting the node (gateway) as a repeater, payload is library version.
-
Yes, of course @martinhjelmare , you're right. It's this that kicks in:
https://github.com/mysensors/MySensors/blob/934ccf30b205afad2086c908a367c4205ce580cd/core/MySensorsCore.cpp#L285Hmm.. Wonder why the Vera plugin isn't sending I_VERSION like it should then...
-
@hek andf @martinhjelmare i did some debugging this evening and came to the following findings
My previous comment on start-up behavior was based on a stand alone GW (so disconnected from the Vera Controller)
And i found out that the Library version is NOT pushed by the gateway but requested by the controller on plugin startup.And this part (on GW side is working) --> Sending "0;0;0;3;0;2;Get Version" to the GW is being answered with "0;255;3;0;2;2.0.0"
So it must be the Vera plugin and then i found this line in my Vera box
02 07/30/16 23:23:43.694 luup_log:64: Arduino: Incoming internal command '0;255;3;0;2;2.0.0' discarded for child: nil <0x6c14>So the MySensors v2.0.0 GW responses with alt-id 0;255 i.s.o 0;0
By updating this line https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L370 by... auhm what is already in the current git version it works.So the final conclusion: just update the Vera plugin with the development branch and it works...
-
:+1:
Note. i left the plugin in place, and was able to enroll the node after some time.
I have a feeling it just took Vera / plugin longer than I expected to detect the USB serial connection to the GW.
node ID's seem to come in fine and libversion displays as 2.0.0 for the node. the 2 nodes (+ the updated GW) all appear to be running stable. if i run into another issue i will go for the development branch for the plugin
-
Im on UI7 and have the same issue, on the github development all files are many many months old, the should be newer than like 8 months???
Regards,
Jan -
Im on UI7 and have the same issue, on the github development all files are many many months old, the should be newer than like 8 months???
Regards,
Jan@stofakiller no the 8 month old files where OK for me (UI5)
-
Hi, I have the same issue. I installed the plugin and serial Gateway with no apparent issues, but can't add any sensors. I have triple-checked the wiring on the sensors and gateway with no success. One thing I have notice some of the Arduino LUUP Files on Vera display the following message when you open/view them.
This page contains the following errors:
error on line 1 at column 1: Document is empty
Below is a rendering of the page up to the first error. -
@stofakiller no the 8 month old files where OK for me (UI5)
@BartE
Hi, my plugin still shows version 1.5 even though I am using Version 2.0, I have not been able to include a single sensor. I have created 3 of them and not one can be found by the Plugin after the Inclusion button is pressed, any input would be greatly appreciated. -
The vera plugin still has version 1.5. It does not correlate to MySensors Arduino library versions.
https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L20
Are you on UI7 or UI5?
When pressing inclusion mode button, does anything happen in the UI? (the text changes in the device to "found devices...")
-
hi, I am using UI5. After pressing the Start button it indicates that "0 devices found"
-
Yes, I start by having the sensor unplugged, that right after the Start button is pressed I plug in the sensor. One thing I noticed though, is that if I go to the LUUP files and try to "view" them, som of them display the folling message:
This page contains the following errors:
error on line 1 at column 1: Document is empty
Below is a rendering of the page up to the first error.but if I download the same LUUP file and open it in Notepad the file is there
-
Just to verify. You mean that you plug in the wireless sensor (with a radio)? Not the gateway?
If so, you should have a look in the serial log of the gateway (Serial Monitor in Arduino IDE) while it is connected to your computer. Restart the (wireless) node an capture the log.
-
yes the wireless sensor with radio, not the Gateway. The gateway is plugged in on the Vera's USB port. Ok will do.
Thanks -
Just to verify. You mean that you plug in the wireless sensor (with a radio)? Not the gateway?
If so, you should have a look in the serial log of the gateway (Serial Monitor in Arduino IDE) while it is connected to your computer. Restart the (wireless) node an capture the log.
@hek ok the serial monitor comes up blank, with this in the upper left corner:
"1Öyô¹¹q0"
nothing happens after the wireless sensor is powered.....
-
after switching to 115200 baud, the following poped up:
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.0.0
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1no changed occurred when wireless sensor was re-started
-
should I wire up a new radio, should I wire up a complete gateway with radio (or both)?
