Printables
-
I have printed the Vera3 Serial Gateway Box and it looks great! Had a problem with the top (my mistake more than likely!) and had to print it upside down (top on the bottom) or it wouldn't print right. This was using an XYZ Printer. Overall, a great box!
-
No not yet.. Off travelling this weekend. Not much printing :(
Found a great lamp that's on the must-print-list first. 6 hour print!
http://www.thingiverse.com/thing:19104 -
Please feel free to add the Lux Sensor case I posted on the vera forum some time back together with the code.
The files can also be found on thingiverse: http://www.thingiverse.com/thing:487840 -
Added a buying guide (for the brave) :smile:
-
@shawn_ky said:
Would love to see if anyone has made a motion printable...
you mean a motion sensor casing?
-
I've build a Prusa model, but the parts for my printer was put together by Arduino Verkstad. They had printed some gears. With a steel frame from a local supplier and the rest of the parts came from somewhere else. So it is's the same model but not from this buyer.
-
-
Please feel free to add the Lux Sensor case I posted on the vera forum some time back together with the code.
The files can also be found on thingiverse: http://www.thingiverse.com/thing:487840
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login