Printables

[hek]

Created a new page for printable MySensors stuff. Please let me know if you've created things that could fit on the page.

http://www.mysensors.org/build/print

[marceltrapman]

Good plan.
Did you print them yourself already :)

[hek]

@marceltrapman

No not yet.. Off travelling this weekend. Not much printing :(

Found a great lamp that's on the must-print-list first. 6 hour print!
http://www.thingiverse.com/thing:19104

[shawn_ky]

I have printed the Vera3 Serial Gateway Box and it looks great! Had a problem with the top (my mistake more than likely!) and had to print it upside down (top on the bottom) or it wouldn't print right. This was using an XYZ Printer. Overall, a great box!

[Yveaux]

@hek Wow! That's a real show-off print :+1:

[idefix]

Please feel free to add the Lux Sensor case I posted on the vera forum some time back together with the code.
The files can also be found on thingiverse: http://www.thingiverse.com/thing:487840

[hek]

@idefix said:

http://www.thingiverse.com/thing:487840

Oh! Nice. Will add it when I'm back home.

[shawn_ky]

Would love to see if anyone has made a motion printable...

[idefix]

@shawn_ky said:

Would love to see if anyone has made a motion printable...

you mean a motion sensor casing?

[hek]

Added a buying guide (for the brave) :smile:

http://www.mysensors.org/build/print

[Yveaux]

@hek you've built the reprap prusa from the shop, right?

[shawn_ky]

@idefix said:

@shawn_ky said:

Would love to see if anyone has made a motion printable...

you mean a motion sensor casing?

Yes... The casing...

[hek]

@Yveaux

I've build a Prusa model, but the parts for my printer was put together by Arduino Verkstad. They had printed some gears. With a steel frame from a local supplier and the rest of the parts came from somewhere else. So it is's the same model but not from this buyer.

[idefix]

@shawn_ky said:

@idefix said:

@shawn_ky said:

Would love to see if anyone has made a motion printable...

you mean a motion sensor casing?

Yes... The casing...

I should have a sensor somewhere. If I find it I can quickly draw one up.

[shawn_ky]

@idefix that would be awesome!! I'm still waiting on materials to come in from Chinabut building what I can until then.

[hek]

@idefix

Your lux sensor casing has now been added to printables-page.

[hek]

@FUZNUTS send me a link to a nice 3d model for an ethernet gateway the other day.

You can find it together with instructions here:
http://www.thingiverse.com/thing:626368

I'll add it to the homepage also.