💬 Servo Control Actuator
Im trying to get this sketch do make continuos motion..I have hacked the Futada S3002 for this but I cant get my head around editiing the sketch for it.Help?
Sorry, Futaba S3003 is the servo
Sorry for being a noob...#define DETACH_DELAY was the answer
Duncan Pullen last edited by
I had issues with this sketch only doing what looked like 90° of motion when using a slider.
Turned out, it was doing 100°.
To rectify change the myservo.write line to:
myservo.write(SERVO_MAX + (SERVO_MIN-SERVO_MAX)/100 * 1.8 * val); // sets the servo position 0-180
anno last edited by
how, what and is it possible to control 2 servo's, on pin 3 and 4 of 1 arduino?