💬 MySensors Hardware

[hek]

This thread contains comments for the article "MySensors Hardware" posted on MySensors.org.

[jamzm]

Hi. I'm not sure if this is the correct place to ask this question, but i obtained 3 of the following boards, and I'm not sure how the atmega328p-pu mounts to it. I just need to know where i can find more info on this. Thanks
https://oshpark.com/shared_projects/F7esJEMY

[mfalkvidd]

@jamzm the side with the groove on the atmega328p-pu goes towards the hole marked with a square on the pcb.

[mfalkvidd]

Let's tag @flopp who created the board and see if he has any additional information.

[jamzm]

Thank you...That's a start. So since pin 1 goes into the hole marked with a square, the ic gets mounted on the side with all the markings. But is there any documentation that I can learn more from? Thanks again for your help. Yes, how do we get info from Mr. Flopp?

[mfalkvidd]

@jamzm you could try sending a message using the forum chat. Except that, there isn't much to do but wait.

[Enrg Tech]

This post is deleted!

[jackhicks121]

This post is deleted!