Cant connect to w5100 ethernet gateway
-
Wired up a w5100 and radio as shows in the ethernet gateway build page. Using a generic arduino uno with the w5100 hooked up to 5v and the radio hooked up to 3.3.
Serial Monitor shows:
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 10.0.0.25I cannot see the IP address on my router device page.
Vera says: MySensors plugin : Cannot send command - communications error
Any ideas?
-
Wired up a w5100 and radio as shows in the ethernet gateway build page. Using a generic arduino uno with the w5100 hooked up to 5v and the radio hooked up to 3.3.
Serial Monitor shows:
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 10.0.0.25I cannot see the IP address on my router device page.
Vera says: MySensors plugin : Cannot send command - communications error
Any ideas?
-
https://forum.mysensors.org/topic/4680/mysensors-2-0-ethernet-gateway-atmega-w5100-restart-all-time
Downgrade your AVR core to 1.6.11, it will work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login