trash

[b0rmann]

last few days my gateway receive too much messages with non-existing node and sensor id, or with existing node/sensor id and malformed data or data from other nodes/sensors.

samples (from Raspberry PI MQTT gateway log)

Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=167,c=1,t=0,pt=7,l=5,sg=0:23.5
Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/167/1/0/0
Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,2-10-0,s=251,c=1,t=1,pt=7,l=5,sg=0:23.4
Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/251/1/0/1
Oct 21 08:27:20 pi mysGateway[30406]: TSF:MSG:READ,130-10-0,s=167,c=1,t=0,pt=7,l=5,sg=0:23.5
Oct 21 08:27:20 pi mysGateway[30406]: Sending message on topic: MyGW1-out/130/167/1/0/0

but I have not node with id 130!

Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,11-11-0,s=4,c=1,t=4,pt=7,l=5,sg=0:1013
Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,11-10-0,s=4,c=1,t=4,pt=7,l=5,sg=0:1013
Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4
Oct 21 12:06:02 pi mysGateway[30406]: TSF:MSG:READ,3-10-0,s=0,c=1,t=0,pt=7,l=5,sg=0:13.2
Oct 21 12:06:02 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/0/1/0/0
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-3-0,s=3,c=1,t=23,pt=2,l=2,sg=0:98
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/3/1/0/23
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-3-0,s=4,c=1,t=23,pt=2,l=2,sg=0:8
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/4/1/0/23
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,11-11-0,s=0,c=1,t=0,pt=7,l=5,sg=0:12
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/0/1/0/0
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,3-10-0,s=4,c=1,t=23,pt=2,l=2,sg=0:8
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/3/4/1/0/23
Oct 21 12:06:04 pi mysGateway[30406]: TSF:MSG:READ,11-10-0,s=4,c=1,t=4,pt=7,l=5,sg=0:13.3
Oct 21 12:06:04 pi mysGateway[30406]: Sending message on topic: MyGW1-out/11/4/1/0/4

sensor 11/4 is atmosferic pressure bmp180. 16:03:04 gateway receive message from this sensor and value from sensor 3/0 (ds18b20)

Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=251,c=1,t=0,pt=7,l=5,sg=0:23.8
Oct 21 14:37:17 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/251/1/0/0
Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-2-0,s=167,c=1,t=0,pt=7,l=5,sg=0:24.0
Oct 21 14:37:17 pi mysGateway[30406]: Sending message on topic: MyGW1-out/2/167/1/0/0
Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:READ,2-10-0,s=250,c=1,t=0,pt=7,l=5,sg=0:23.8
Oct 21 14:37:17 pi mysGateway[30406]: TSF:MSG:ACK REQ

node 2 have not sensor 250. only 251

[Nca78]

Any nerdy neighbour nearby that would use MySensors also ? :D

[b0rmann]

no. i have not any nerdy neighbourd :)

[tekka]

@b0rmann Sounds like power issue or bad/too long SPI wires.

[b0rmann]

@tekka

gateway has 5-10cm. node - on pcb

p.s. after clearing repeater node (#10) eeprom it looks better