openhabian mySensors setup
-
Make command doesn't work on openhabian image.
I installed openhab with the openhabian image and it works.
I did the following ...[15:20:07] pi@openHABianPi:~$ git clone https://github.com/mysensors/MySensors.git Cloning into 'MySensors'... remote: Counting objects: 13297, done. remote: Total 13297 (delta 0), reused 0 (delta 0), pack-reused 13296 Receiving objects: 100% (13297/13297), 9.34 MiB | 3.35 MiB/s, done. Resolving deltas: 100% (7989/7989), done. Checking connectivity... done. [15:20:54] pi@openHABianPi:~$ cd MySensors [15:21:01] pi@openHABianPi:~/MySensors$ ./configure --help 15:21:10] pi@openHABianPi:~/MySensors$ ./configure --my-transport=nrf24 --my-rf24-irq-pin=15 [SECTION] Detecting target machine. [OK] machine detected: SoC=BCM2836, Type=RPi3, CPU=armv7l, REV=a02082. [OK] init system detected: systemd [SECTION] Saving configuration. [SECTION] Cleaning previous builds. ./configure: line 505: make: command not found [OK] Finished. [15:22:49] pi@openHABianPi:~/MySensors$ make -bash: make: command not found [15:29:14] pi@openHABianPi:~$ sudo apt-get install make E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. [15:29:22] pi@openHABianPi:~$ sudo dpkg --configure -a Setting up libpng12-0:armhf (1.2.50-2+deb8u2) ... Setting up libfontenc1:armhf (1:1.1.2-1) ... Processing triggers for libc-bin (2.19-18+deb8u6) ... [15:29:49] pi@openHABianPi:~$ sudo apt-get install make Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: make-doc The following NEW packages will be installed: make 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded. Need to get 333 kB of archives. After this operation, 1,047 kB of additional disk space will be used. Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main make armhf 4.0-8.1 [333 kB] Fetched 333 kB in 0s (758 kB/s) error: unable to resolve reference HEAD: Invalid argument fatal: cannot lock HEAD ref warning: etckeeper failed to commit changes in /etc using git Selecting previously unselected package make. (Reading database ... 26337 files and directories currently installed.) Preparing to unpack .../make_4.0-8.1_armhf.deb ... Unpacking make (4.0-8.1) ... Processing triggers for man-db (2.7.0.2-5) ... Setting up make (4.0-8.1) ... error: unable to resolve reference HEAD: Invalid argument fatal: cannot lock HEAD ref warning: etckeeper failed to commit changes in /etc using git Updating FireMotD available updates count ... [15:31:13] pi@openHABianPi:~$ cd MySensors [15:31:21] pi@openHABianPi:~/MySensors$ make gcc -MT build/drivers/Linux/log.o -MMD -MP -march=armv7-a -mtune=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard -DMY_RADIO_NRF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -D__RPI_BPLUS -DLINUX_ARCH_RASPBERRYPI -DMY_RX_MESSAGE_BUFFER_FEATURE -DMY_RF24_IRQ_PIN=15 -Ofast -g -Wall -Wextra -I. -I./core -I./drivers/Linux -I./drivers/RPi -c drivers/Linux/log.c -o build/drivers/Linux/log.o make: gcc: Command not found Makefile:102: recipe for target 'build/drivers/Linux/log.o' failed make: *** [build/drivers/Linux/log.o] Error 127What's wrong?
-
@patrick-schaerer The gateway needs a bunch of development tools (make, as you have already identified, and gcc but probably other tools as well) that aren't installed by default on that image.
Start withsudo apt-get install gccThat should get you one step further at least. Then rinse and repeat for any command/utility that is missing.
-
ok thanks
i'll try
-
sudo apt-get install g++then I could do "make"
