MQ 135 will not send data



  • I am having trouble getting the MQ 135 to send data. I have checked out everything 3-4 times and it appears to be hooked up right and when I force butane from a lighter into it the red light comes on on the sensor board. I am getting this output on the serial monitor

    Starting sensor (RNNNA-, 2.0.0) TSM:INIT TSM:RADIO:OK TSM:FPAR TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSM:FPAR:FAIL !TSM:FAILURE TSM:PDT

    Any help would be greatly appreciated...



  • @toddsantoro
    I dont have 2.0 but it looks like it is asking for a Node ID from the Controller.

    Try to force it to use a specific Node ID and see what happens



  • @flopp would I do that by adding this line:

    #define MY_NODE_ID 3



  • What controller to you use?

    Yes, that is the row. But I don't have 2.0 myself so I don't know how to use that row when sending data to controller


 

431
Online

8.0k
Users

8.8k
Topics

94.4k
Posts