rpi+mqtt+hass: persistence_file - file does not exist or is not readable
-
Hey guys,
I have tried a lot but I am running out of ideas:
Mar 28 23:48:02 raspberrypi hass[4183]: #033[0m Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=introduction>#033[0m Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.bootstrap] Setting up recorder#033[0m Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=recorder>#033[0m Mar 28 23:48:02 raspberrypi hass[4183]: #033[32m17-03-28 23:48:02 INFO (MainThread) [homeassistant.bootstrap] Setting up logger#033[0m Mar 28 23:48:02 raspberrypi hass[4183]: #033[33m17-03-28 23:48:02 WARNING (Thread-5) [homeassistant.components.emulated_hue] Listen IP address not specified, auto-detected address is 192.168.1.9#033[0m Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] File does not exist or is not readable: /home/homeassistant/.homeassistant/mysensors.json#033[0m Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] Trying backup file: /home/homeassistant/.homeassistant/mysensors.json.bak#033[0m Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] File does not exist or is not readable: /home/homeassistant/.homeassistant/mysensors.json.bak#033[0m Mar 28 23:48:07 raspberrypi hass[4183]: #033[33m17-03-28 23:48:07 WARNING (Thread-1) [mysensors.mysensors] Failed to load sensors from file: /home/homeassistant/.homeassistant/mysensors.json#033[0m Mar 28 23:48:18 raspberrypi hass[4183]: #033[32m17-03-28 23:48:18 INFO (Thread-14) [mysensors.mysensors] Setting up initial MQTT topic subscription#033[0m Mar 28 23:48:18 raspberrypi hass[4183]: #033[36m17-03-28 23:48:18 DEBUG (Thread-14) [mysensors.mysensors] Subscribing to: P/+/+/0/+/+#033[0m Mar 28 23:48:18 raspberrypi hass[4183]: #033[36m17-03-28 23:48:18 DEBUG (Thread-14) [mysensors.mysensors] Subscribing to: P/+/+/3/+/+#033[0m415 mysensors: 416 gateways: 417 - device: mqtt 418 persistence_file: '/home/homeassistant/.homeassistant/mysensors.json' 419 # persistence_file: '/home/pi/mysensors.json' 420 # persistence_file: '/tmp/mysensors-moist.json' 421 #topic_in_prefix: 'mygateway1-out' 422 topic_in_prefix: 'P' 423 #topic_out_prefix: 'mygateway1-in' 424 topic_out_prefix: 'S' 425 debug: true 426 optimistic: false 427 persistence: true 428 retain: true 429 version: 2.0Anybody knows why I cant create the persistance file?
Hi!
The persistence file will be created automatically when the first updates come in from your sensor(s). The first time you start home assistant with mysensors activated, this log warning is expected.
-
Hi!
The persistence file will be created automatically when the first updates come in from your sensor(s). The first time you start home assistant with mysensors activated, this log warning is expected.
@martinhjelmare
Thank you for your reply.
I am using the moisture sensor. https://www.mysensors.org/build/moisture
I just copied the sketch. As far as I understand it, there are no changes necessary.This is some output from the Arduino Seriel Monitor:
112455 TSM:ID:REQ 112458 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 114465 !TSM:ID:FAIL 114466 TSM:FAIL:CNT=6 114468 TSM:FAIL:PDT 124471 TSM:FAIL:RE-INIT 124473 TSM:INIT 124480 TSM:INIT:TSP OK 124482 TSM:FPAR 124485 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 124566 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 124571 TSF:MSG:FPAR OK,ID=0,D=1 126493 TSM:FPAR:OK 126494 TSM:ID 126496 TSM:ID:REQ 126499 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 128506 TSM:ID 128507 TSM:ID:REQ 128510 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 130518 TSM:ID 130519 TSM:ID:REQ 130522 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 132529 TSM:ID 132530 TSM:ID:REQ 132533 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 134540 !TSM:ID:FAIL 134541 TSM:FAIL:CNT=7 134544 TSM:FAIL:PDT 194546 TSM:FAIL:RE-INIT 194548 TSM:INIT 194555 TSM:INIT:TSP OK 194557 TSM:FPAR 194561 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 194913 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 194918 TSF:MSG:FPAR OK,ID=0,D=1 196569 TSM:FPAR:OK 196570 TSM:ID 196572 TSM:ID:REQ 196575 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 198582 TSM:ID 198583 TSM:ID:REQ 198586 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 200593 TSM:ID 200594 TSM:ID:REQ 200597 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 202604 TSM:ID 202605 TSM:ID:REQ 202608 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 204615 !TSM:ID:FAIL 204616 TSM:FAIL:CNT=7 204618 TSM:FAIL:PDTThis is some output from the mysgw.service
(tail -n 40 -F /var/log/syslog | grep mysgw)Mar 29 17:36:52 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:36:52 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:37:56 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:37:56 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:37:58 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:37:58 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:38:02 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:38:02 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:39:06 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:39:06 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:39:07 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:39:08 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:08 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:10 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:10 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:12 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:12 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:14 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:14 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3Can you help me understand those logs? As far as I interpret it, the moisture sensor runs (but gets no ID from time to time?!) (346778 !TSM:ID:FAIL)....
Does my moisture sensor send updates? Does it work?Thank you!
-
@martinhjelmare
Thank you for your reply.
I am using the moisture sensor. https://www.mysensors.org/build/moisture
I just copied the sketch. As far as I understand it, there are no changes necessary.This is some output from the Arduino Seriel Monitor:
112455 TSM:ID:REQ 112458 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 114465 !TSM:ID:FAIL 114466 TSM:FAIL:CNT=6 114468 TSM:FAIL:PDT 124471 TSM:FAIL:RE-INIT 124473 TSM:INIT 124480 TSM:INIT:TSP OK 124482 TSM:FPAR 124485 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 124566 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 124571 TSF:MSG:FPAR OK,ID=0,D=1 126493 TSM:FPAR:OK 126494 TSM:ID 126496 TSM:ID:REQ 126499 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 128506 TSM:ID 128507 TSM:ID:REQ 128510 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 130518 TSM:ID 130519 TSM:ID:REQ 130522 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 132529 TSM:ID 132530 TSM:ID:REQ 132533 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 134540 !TSM:ID:FAIL 134541 TSM:FAIL:CNT=7 134544 TSM:FAIL:PDT 194546 TSM:FAIL:RE-INIT 194548 TSM:INIT 194555 TSM:INIT:TSP OK 194557 TSM:FPAR 194561 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 194913 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 194918 TSF:MSG:FPAR OK,ID=0,D=1 196569 TSM:FPAR:OK 196570 TSM:ID 196572 TSM:ID:REQ 196575 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 198582 TSM:ID 198583 TSM:ID:REQ 198586 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 200593 TSM:ID 200594 TSM:ID:REQ 200597 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 202604 TSM:ID 202605 TSM:ID:REQ 202608 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 204615 !TSM:ID:FAIL 204616 TSM:FAIL:CNT=7 204618 TSM:FAIL:PDTThis is some output from the mysgw.service
(tail -n 40 -F /var/log/syslog | grep mysgw)Mar 29 17:36:52 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:36:52 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:37:56 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:37:56 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:37:58 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:37:58 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:38:02 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:38:02 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:39:06 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:39:06 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:39:07 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:39:08 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:08 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:10 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:10 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:12 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:12 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:14 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:14 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3Can you help me understand those logs? As far as I interpret it, the moisture sensor runs (but gets no ID from time to time?!) (346778 !TSM:ID:FAIL)....
Does my moisture sensor send updates? Does it work?Thank you!
-
@martinhjelmare
Thank you for your reply.
I am using the moisture sensor. https://www.mysensors.org/build/moisture
I just copied the sketch. As far as I understand it, there are no changes necessary.This is some output from the Arduino Seriel Monitor:
112455 TSM:ID:REQ 112458 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 114465 !TSM:ID:FAIL 114466 TSM:FAIL:CNT=6 114468 TSM:FAIL:PDT 124471 TSM:FAIL:RE-INIT 124473 TSM:INIT 124480 TSM:INIT:TSP OK 124482 TSM:FPAR 124485 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 124566 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 124571 TSF:MSG:FPAR OK,ID=0,D=1 126493 TSM:FPAR:OK 126494 TSM:ID 126496 TSM:ID:REQ 126499 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 128506 TSM:ID 128507 TSM:ID:REQ 128510 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 130518 TSM:ID 130519 TSM:ID:REQ 130522 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 132529 TSM:ID 132530 TSM:ID:REQ 132533 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 134540 !TSM:ID:FAIL 134541 TSM:FAIL:CNT=7 134544 TSM:FAIL:PDT 194546 TSM:FAIL:RE-INIT 194548 TSM:INIT 194555 TSM:INIT:TSP OK 194557 TSM:FPAR 194561 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 194913 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 194918 TSF:MSG:FPAR OK,ID=0,D=1 196569 TSM:FPAR:OK 196570 TSM:ID 196572 TSM:ID:REQ 196575 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 198582 TSM:ID 198583 TSM:ID:REQ 198586 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 200593 TSM:ID 200594 TSM:ID:REQ 200597 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 202604 TSM:ID 202605 TSM:ID:REQ 202608 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 204615 !TSM:ID:FAIL 204616 TSM:FAIL:CNT=7 204618 TSM:FAIL:PDTThis is some output from the mysgw.service
(tail -n 40 -F /var/log/syslog | grep mysgw)Mar 29 17:36:52 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:36:52 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:37:56 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:37:56 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:37:58 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:37:58 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:38:02 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:38:02 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:39:06 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:39:06 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:39:07 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:39:08 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:08 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:10 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:10 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:12 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:12 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:14 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:14 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3Can you help me understand those logs? As far as I interpret it, the moisture sensor runs (but gets no ID from time to time?!) (346778 !TSM:ID:FAIL)....
Does my moisture sensor send updates? Does it work?Thank you!
If you have the controller connected, ie home assistant, it should answer the request for ID. That doesn't seem to happen.
-
@monkee If no ID set it can not work. Try running the clear eeprom sketch and reload your sketch and set ID 2 or 3
@gohan Did as you suggested (cleared the rom) and changed the line from "#define CHILD_ID 0" to "#define CHILD_ID 3". Now I get:
0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1 3 TSM:INIT 6 TSF:WUR:MS=0 13 TSM:INIT:TSP OK 15 !TSF:SID:FAIL,ID=0 17 TSM:FAIL:CNT=1 18 TSM:FAIL:PDT 10021 TSM:FAIL:RE-INIT 10023 TSM:INIT 10031 TSM:INIT:TSP OK 10033 !TSF:SID:FAIL,ID=0 10035 TSM:FAIL:CNT=2 10037 TSM:FAIL:PDT 20040 TSM:FAIL:RE-INIT 20042 TSM:INIT 20049 TSM:INIT:TSP OK 20051 !TSF:SID:FAIL,ID=0 20054 TSM:FAIL:CNT=3 20056 TSM:FAIL:PDT 30059 TSM:FAIL:RE-INIT 30061 TSM:INIT 30068 TSM:INIT:TSP OK 30070 !TSF:SID:FAIL,ID=0 30072 TSM:FAIL:CNT=4@martinhjelmare
I have the controller connected? Means I have started home-assistant on a rpi (connected with the sensor network i hope, as explained here https://www.mysensors.org/build/raspberry ) What could be wrong? -
@gohan Did as you suggested (cleared the rom) and changed the line from "#define CHILD_ID 0" to "#define CHILD_ID 3". Now I get:
0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1 3 TSM:INIT 6 TSF:WUR:MS=0 13 TSM:INIT:TSP OK 15 !TSF:SID:FAIL,ID=0 17 TSM:FAIL:CNT=1 18 TSM:FAIL:PDT 10021 TSM:FAIL:RE-INIT 10023 TSM:INIT 10031 TSM:INIT:TSP OK 10033 !TSF:SID:FAIL,ID=0 10035 TSM:FAIL:CNT=2 10037 TSM:FAIL:PDT 20040 TSM:FAIL:RE-INIT 20042 TSM:INIT 20049 TSM:INIT:TSP OK 20051 !TSF:SID:FAIL,ID=0 20054 TSM:FAIL:CNT=3 20056 TSM:FAIL:PDT 30059 TSM:FAIL:RE-INIT 30061 TSM:INIT 30068 TSM:INIT:TSP OK 30070 !TSF:SID:FAIL,ID=0 30072 TSM:FAIL:CNT=4@martinhjelmare
I have the controller connected? Means I have started home-assistant on a rpi (connected with the sensor network i hope, as explained here https://www.mysensors.org/build/raspberry ) What could be wrong? -
@gohan Did as you suggested (cleared the rom) and changed the line from "#define CHILD_ID 0" to "#define CHILD_ID 3". Now I get:
0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1 3 TSM:INIT 6 TSF:WUR:MS=0 13 TSM:INIT:TSP OK 15 !TSF:SID:FAIL,ID=0 17 TSM:FAIL:CNT=1 18 TSM:FAIL:PDT 10021 TSM:FAIL:RE-INIT 10023 TSM:INIT 10031 TSM:INIT:TSP OK 10033 !TSF:SID:FAIL,ID=0 10035 TSM:FAIL:CNT=2 10037 TSM:FAIL:PDT 20040 TSM:FAIL:RE-INIT 20042 TSM:INIT 20049 TSM:INIT:TSP OK 20051 !TSF:SID:FAIL,ID=0 20054 TSM:FAIL:CNT=3 20056 TSM:FAIL:PDT 30059 TSM:FAIL:RE-INIT 30061 TSM:INIT 30068 TSM:INIT:TSP OK 30070 !TSF:SID:FAIL,ID=0 30072 TSM:FAIL:CNT=4@martinhjelmare
I have the controller connected? Means I have started home-assistant on a rpi (connected with the sensor network i hope, as explained here https://www.mysensors.org/build/raspberry ) What could be wrong?Child id is not the same as node id. Use
MY_NODE_IDif you want to set a static node id in the sketch. -
@martinhjelmare
Thank you for your reply.
I am using the moisture sensor. https://www.mysensors.org/build/moisture
I just copied the sketch. As far as I understand it, there are no changes necessary.This is some output from the Arduino Seriel Monitor:
112455 TSM:ID:REQ 112458 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 114465 !TSM:ID:FAIL 114466 TSM:FAIL:CNT=6 114468 TSM:FAIL:PDT 124471 TSM:FAIL:RE-INIT 124473 TSM:INIT 124480 TSM:INIT:TSP OK 124482 TSM:FPAR 124485 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 124566 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 124571 TSF:MSG:FPAR OK,ID=0,D=1 126493 TSM:FPAR:OK 126494 TSM:ID 126496 TSM:ID:REQ 126499 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 128506 TSM:ID 128507 TSM:ID:REQ 128510 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 130518 TSM:ID 130519 TSM:ID:REQ 130522 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 132529 TSM:ID 132530 TSM:ID:REQ 132533 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 134540 !TSM:ID:FAIL 134541 TSM:FAIL:CNT=7 134544 TSM:FAIL:PDT 194546 TSM:FAIL:RE-INIT 194548 TSM:INIT 194555 TSM:INIT:TSP OK 194557 TSM:FPAR 194561 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 194913 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 194918 TSF:MSG:FPAR OK,ID=0,D=1 196569 TSM:FPAR:OK 196570 TSM:ID 196572 TSM:ID:REQ 196575 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 198582 TSM:ID 198583 TSM:ID:REQ 198586 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 200593 TSM:ID 200594 TSM:ID:REQ 200597 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 202604 TSM:ID 202605 TSM:ID:REQ 202608 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 204615 !TSM:ID:FAIL 204616 TSM:FAIL:CNT=7 204618 TSM:FAIL:PDTThis is some output from the mysgw.service
(tail -n 40 -F /var/log/syslog | grep mysgw)Mar 29 17:36:52 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:36:52 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:37:56 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:37:56 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:37:56 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:37:58 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:37:58 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:38:02 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:38:02 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:BC Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:FPAR REQ,ID=255 Mar 29 17:39:06 raspberrypi mysgw: TSF:PNG:SEND,TO=0 Mar 29 17:39:06 raspberrypi mysgw: TSF:CKU:OK Mar 29 17:39:06 raspberrypi mysgw: TSF:MSG:GWL OK Mar 29 17:39:07 raspberrypi mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 Mar 29 17:39:08 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:08 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:10 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:10 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:12 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:12 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3 Mar 29 17:39:14 raspberrypi mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: Mar 29 17:39:14 raspberrypi mysgw: Sending message on topic: mysensors-out/255/255/3/0/3Can you help me understand those logs? As far as I interpret it, the moisture sensor runs (but gets no ID from time to time?!) (346778 !TSM:ID:FAIL)....
Does my moisture sensor send updates? Does it work?Thank you!
I see a problem. Your topic prefix reported in the gateway log is not the same as the prefixes you have set in the home assistant config for mysensors.
-
Child id is not the same as node id. Use
MY_NODE_IDif you want to set a static node id in the sketch.@martinhjelmare said in rpi+mqtt+hass: persistence_file - file does not exist or is not readable:
Child id is not the same as node id. Use
MY_NODE_IDif you want to set a static node id in the sketch.woops, I missed that. I answered while at work and I was in a hurry :D
-
I see a problem. Your topic prefix reported in the gateway log is not the same as the prefixes you have set in the home assistant config for mysensors.
@gohan
New Arduino wired and conncted, uploaded sketch, etc.
Same result.@martinhjelmare
I changed the hass cfg to:417 mysensors: 418 gateways: 419 - device: mqtt 420 persistence_file: '/home/homeassistant/.homeassistant/mysensors.json' 421 topic_in_prefix: 'mysensors-out' 422 topic_out_prefix: 'mysensors-in'Now its the same as reported in the gateway log...
Its working. Thanks guys!
One last question, just to be clear:
Its fine to have "#define CHILD_ID 0", right?
