Fail presentation to gateway

  • Hi, got some nodes with DHT22 and for some reason the GW dosent now the sensortype for S_Temp just the S_HUM. Anyone seen this before?
    Using MYSController to connect to GW. And got node -child item 0 -s_hum and child item 1 (blank description)
    Subtype is V_Temp

  • If I look in log it fail to present temp senor. Code looks like this .
    // Register all sensors to gw (they will be created as child devices)
    present(CHILD_ID_HUM, S_HUM);
    present(CHILD_ID_TEMP, S_TEMP);

    If I swap places on Temp it fails to present HUM sensor.

  • Hero Member

    Try adding a short "wait(50);" between the presentations and put a cap on your radio ;)

    present(CHILD_ID_HUM, S_HUM);
    present(CHILD_ID_TEMP, S_TEMP);

  • @korttoma Thx the wait(50) did the trick :)

Log in to reply

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.