Domoticz - soil moisture + one relay = Lua script error (Blockly)
-
// Enable debug prints to serial monitor
#define MY_DEBUG// Enable and select radio type attached
#define MY_RADIO_NRF24
#define CHILD_ID_MOISTURE 0#include <MySensors.h>
// Here we are setting up some water thresholds that we will
// use later. Note that you will need to change these to match
// your soil type and environment. It doesn't do much for me because I'm using domoticz
int thresholdUp = 400;
int thresholdDown = 075;
MyMessage msg(CHILD_ID_MOISTURE, S_HUM);
unsigned long SLEEP_TIME = 30000;// We are setting up the pin A0 on the redboard to be our sensor
// pin input:
int sensorPin = A0;void presentation()
{
present(CHILD_ID_MOISTURE, S_HUM);
}void loop()
{
int sensorValue;
sensorValue = analogRead(sensorPin);//send back the values
send(msg.set(sensorValue));
// delay until next measurement (msec)
sleep(SLEEP_TIME);
} -
0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1 3 TSM:INIT 4 TSF:WUR:MS=0 11 TSM:INIT:TSP OK 13 TSF:SID:OK,ID=2 14 TSM:FPAR 51 TSF:MSG:SEND,2-2-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 775 TSF:MSG:READ,0-0-2,s=255,c=3,t=8,pt=1,l=1,sg=0:0 780 TSF:MSG:FPAR OK,ID=0,D=1 2058 TSM:FPAR:OK 2059 TSM:ID 2060 TSM:ID:OK 2062 TSM:UPL 2065 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 2074 TSF:MSG:READ,0-0-2,s=255,c=3,t=25,pt=1,l=1,sg=0:1 2079 TSF:MSG:PONG RECV,HP=1 2081 TSM:UPL:OK 2083 TSM:READY:ID=2,PAR=0,DIS=1 2087 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100 2095 TSF:MSG:READ,0-0-2,s=255,c=3,t=15,pt=6,l=2,sg=0:0100 2102 TSF:MSG:SEND,2-2-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.1 2110 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0 2123 TSF:MSG:READ,0-0-2,s=255,c=3,t=6,pt=0,l=1,sg=0:M 2132 TSF:MSG:SEND,2-2-0-0,s=0,c=0,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2139 MCO:REG:REQ 2146 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2 2152 TSF:MSG:READ,0-0-2,s=255,c=3,t=27,pt=1,l=1,sg=0:1 2157 MCO:PIM:NODE REG=1 2160 MCO:BGN:INIT OK,TSP=1 2168 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=2,l=2,sg=0,ft=0,st=OK:413 2174 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 2180 MCO:SLP:TPD 2182 MCO:SLP:WUP=-1 2189 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=2,l=2,sg=0,ft=0,st=OK:412 2195 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 2200 MCO:SLP:TPD 2202 MCO:SLP:WUP=-1 2209 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=2,l=2,sg=0,ft=0,st=OK:412 2214 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 2220 MCO:SLP:TPD -
Check yourself in the log parser page https://www.mysensors.org/build/parser
Your node is connected to gateway and reporting the values (look at the 413 - 412 -412 that were sent).
Also please use the Code TAG when posting code or logs as it makes it more readable.
