MQTT GW and ACK



  • Hi, I'm using mqtt gateway on a raspberry pi controller. When sending data from sensors with ack request, I can see in the gateway debug log that the ack message from the GW to the node also requests an ack (from the sensor node), at least I can see the NACK status in the GW on the ack message. Is this normal ? Can it be switched off ? Acking the ACK message has no purpose 🙂


Log in to reply
 

Suggested Topics

  • 2
  • 3
  • 6
  • 19
  • 1
  • 4
  • 7

208
Online

10.3k
Users

10.7k
Topics

109.8k
Posts