Openhab and Gateway Types
-
Hi,
I have a sensor node communicating via RF24 to a Raspberry Pi (RPi) gateway. This RPi gateway is connected via Ethernet to Openhub ( the controller software) also running on the same RPi. This is all working fine. I want to add a SonOff relay to this setup and I want to communicate with the SunOff via MQTT messages.
If I install the MQTT broker software (Mosquitto) on the RPi, will Openhab be able to communicate with the SunOff device, or do I have to add another MQTT gateway application on the RPi?
-
You don't need anything else.
-
Thank you
3 out of 3
Suggested Topics
-
Boxes and Enclosures
Enclosures / 3D Printing • 29 Mar 2014, 21:02 • PITP2 31 Aug 2014, 19:27 -
OH2.5.9 / ethernet gateway / autodiscovery?
OpenHAB • 20 Oct 2020, 15:31 • Stefferd 22 Oct 2020, 13:38 -
OH3 Serial Gateway Problem
OpenHAB • 15 Feb 2022, 09:48 • seppi9 22 Feb 2022, 13:44 -
openhab binding mysensors
OpenHAB • 14 Mar 2021, 18:44 • MDS 15 Mar 2021, 21:56 -
openHAB 2.5 binding and V_VARx
OpenHAB • 25 May 2020, 15:49 • syntacrsc 4 May 2022, 20:47 -
OH3 - MySensors Binding
OpenHAB • 17 Dec 2020, 16:35 • Peter Loeffler 3 Dec 2023, 09:37
