💬 Ebyte nRF52832 Prototyping Board
-
-
I suppose panelizing this board together with a pure prototype board might achieve the objective I was aiming for....
-
It works. Project completed. :)
-
I recommend snipping off the DTR pin using flush cutters. Given the current configuration, it isn't going to work properly.
-
Can you please propose what type of inductors and capacitors did you use ?
A BOM will be great.Actually I am asking because I knew there is something called SRF from this topic https://devzone.nordicsemi.com/question/171472/filter-inductor-requirement-for-nrf52832-in-dcdc-mode/
Thanks.
-
Can you please propose what type of inductors and capacitors did you use ?
A BOM will be great.Actually I am asking because I knew there is something called SRF from this topic https://devzone.nordicsemi.com/question/171472/filter-inductor-requirement-for-nrf52832-in-dcdc-mode/
Thanks.
@ahmedadelhosni said in 💬 Ebyte nRF52832 Prototyping Board:
Can you please propose what type of inductors and capacitors did you use ?
A BOM will be great.It is exactly the same BOM as this: https://www.openhardware.io/view/471/Ebyte-nRF52832-Small-Breakout-Board#tabs-bom
-
@ahmedadelhosni said in 💬 Ebyte nRF52832 Prototyping Board:
Can you please propose what type of inductors and capacitors did you use ?
A BOM will be great.It is exactly the same BOM as this: https://www.openhardware.io/view/471/Ebyte-nRF52832-Small-Breakout-Board#tabs-bom
@NeverDie thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login