Radio no longer working after new Hassbian install

[pgv]

I had a perfectly working MySensors Pi Gateway working on Ethernet alongside a Home Assistant install on the same Pi.

I decided to upgrade the Home Assistant to the latest Hassbian image which meant reinstallation of MySensors. Everything installed OK however now MySensors fails to talk to the radio. Nothing was physically changed on the Pi so I'm reasonably certain the radio and wiring are OK although I have since added a cap on the power supply pins.

Any thoughts?

Here is the debugging output:

pi@ShedHA:~/MySensors $ ./bin/mysgw -d
mysgw: Starting gateway...
mysgw: Protocol version - 2.1.1
mysgw: MCO:BGN:INIT GW,CP=RNNG---,VER=2.1.1
mysgw: TSM:INIT
mysgw: TSF:WUR:MS=0
mysgw: !TSM:INIT:TSP FAIL
mysgw: TSM:FAIL:CNT=1
mysgw: TSM:FAIL:PDT
mysgw: TSM:FAIL:RE-INIT
mysgw: TSM:INIT
mysgw: !TSM:INIT:TSP FAIL
mysgw: TSM:FAIL:CNT=2
mysgw: TSM:FAIL:PDT
mysgw: TSM:FAIL:RE-INIT
mysgw: TSM:INIT
mysgw: !TSM:INIT:TSP FAIL
mysgw: TSM:FAIL:CNT=3```

[gohan]

There are some issues with 2.1.1, try with development version

[monkee]

I had the same problem and can confirm that development version works better.

[pgv]

Installed development version and all working 100%. Thanks for the help.