💬 Wireless remote control
-
-
I have published all the documentation in a Github repository. If someone wants to make PCBs, I recommend that you wait a little longer until you receive my PCBs and try them.
-
Any updates on the board? I really like the design. Where are you getting the casings for the PCB?
Hi @talhatec ,
The remote controls work well. 4 months ago I installed a new battery and from time to time I press the button to check if they continue with battery, they sleep correctly.
I remain pending to change the RF antenna for a better one and to improve some failures in the connectors of the battery that at the moment are very fragile (the pad has little copper).
The casing can be purchased online
https://www.ebay.com/itm/Bluetooth-4-0-GPS-Tracker-Locator-Smart-Alarm-Anti-lost-Device-Self-Portrait-SC/401394156488For now the project is stopped, I want to test the Aqara sensors (I buy them this week), in any case the domotics is now my lowest priority.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login