đŹ JMP Arduino Pro Mini Multisensor Board v2.1
-
-
Could you please add some details on all those solder pads and why you choose that GPIO layout? Also it could be beneficial to have like a sma connector for rfm69 antenna
-
Please follow the rules for the CERN license. You have no license files and changelogs attached to your design as required.
If you have any questions, read here: https://forum.mysensors.org/topic/3096/open-hardware-licensing/
-
@Anticimex, sorry I will provide the correct files as soon as possibile! thanks
-
This post is deleted!
-
@gohan I will add dome details as soon as possible; about the SMA connector it's too big (7.9mm diameter) for this board.
-
New version 2.1 with EEPROM and signing IC!
-
@jumping nice, but you are still missing CERN documentation
-
@anticimex You are too fast
Now the CERN files are uploaded!!
Suggested Topics
-
đŹ Door/Window Sensor
OpenHardware.io ⢠26 Oct 2016, 19:53 ⢠openhardware.io 4 Aug 2017, 13:47 -
Ethernet/NRF Network
OpenHardware.io ⢠24 Jan 2016, 15:39 ⢠openhardware.io 24 Jan 2016, 15:39 -
đŹ RS485 MCU Module
OpenHardware.io ⢠19 Nov 2018, 14:26 ⢠openhardware.io 5 Mar 2019, 21:38 -
đŹ mySensor 3*Relay Din Format
OpenHardware.io ⢠27 Oct 2021, 17:03 ⢠openhardware.io 27 Oct 2021, 17:03 -
RFM69 using Mysensors 2.3.2
General Discussion ⢠28 Sept 2020, 03:53 ⢠Highland 16 Oct 2020, 08:43 -
đŹ RFM69 - 8 relays board
OpenHardware.io ⢠24 Jan 2017, 13:33 ⢠openhardware.io 24 Jan 2017, 13:33 -
đŹ RFM69 Raspberry PI Zero(W) Shield(HAT)
OpenHardware.io ⢠11 Oct 2017, 13:41 ⢠openhardware.io 17 Jan 2018, 11:24 -
Humidity/Temp Sensor Issues
Troubleshooting ⢠25 Feb 2015, 06:03 ⢠FUZNUTS 26 Feb 2015, 19:42
