st=fail on gateway
-
Hi,
Why am I getting these:
Started! 0;0;3;0;9;read: 21-21-0 s=12,c=1,t=38,pt=4,l=4:5001 0;0;3;0;9;send: 0-0-21-21 s=11,c=1,t=0,pt=0,l=0,st=fail: 0;0;3;0;9;send: 0-0-20-20 s=0,c=1,t=0,pt=0,l=0,st=fail: 0;0;3;0;9;send: 0-0-21-21 s=10,c=1,t=1,pt=0,l=0,st=fail: 0;0;3;0;9;send: 0-0-21-21 s=12,c=1,t=38,pt=0,l=0,st=fail: 0;0;3;0;9;send: 0-0-20-20 s=1,c=1,t=38,pt=0,l=0,st=fail: 0;0;3;0;9;send: 0-0-21-21 s=13,c=1,t=23,pt=0,l=0,st=fail:
It can read from sensors:
0;0;3;0;9;read: 21-21-0 s=12,c=1,t=38,pt=4,l=4:4979 MyMQTT/21/12/V_VOLTAGE 0;0;3;0;9;read: 21-21-0 s=12,c=1,t=38,pt=4,l=4:5001
I switched radios but the result's the same. I also experience some problems with sending commands by hand: http://forum.mysensors.org/topic/921/strange-value-being-sent-from-controller-using-mixed-temp-relay-node/33
Do you have any clue what could be wrong?
-
Anyone? RTFM is also accepted answer
-
RTF(T)roubleshoot-guide
http://www.mysensors.org/build/debug
3 out of 3
Suggested Topics
-
Combining Serial and MQTT/Ethernet Gateway
Troubleshooting • 12 Feb 2015, 13:13 • codenea 28 Apr 2015, 15:09 -
💬 MySWeMosGWShield - WeMos Mini MySensors Gateway Shield
OpenHardware.io • 22 Dec 2016, 05:01 • openhardware.io 8 Aug 2018, 17:12 -
SmartSleep a feature of the Gateway
Feature Requests • 18 Jun 2017, 21:05 • strangeoptics 19 Jun 2017, 10:43 -
Ethernet shield help
Troubleshooting • 13 Mar 2015, 17:16 • blutak 13 Mar 2015, 18:32 -
Boards manager package does not install Sensebender gateway
Troubleshooting • 8 Aug 2017, 20:52 • billgoolsby 8 Aug 2017, 20:52 -
Wiring Help
Troubleshooting • 12 Mar 2015, 00:27 • Chaotic 13 Mar 2015, 23:03 -
💬 MySRaspiGW PA+LNA - MySensors Raspberry Pi GPIO Gateway
OpenHardware.io • 7 Jul 2016, 16:30 • openhardware.io 27 Mar 2017, 05:46