Forgive me, I did not mean to offend anyone. I am so sorry. I promise to practice my English:stuck_out_tongue_winking_eye:

hi...look it work to me now with this skech
https://forum.mysensors.org/topic/775/8-lamp-outlet-smart-plug-module

find parent
send: 19-19-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
read: 11-11-19 s=255,c=3,t=8,pt=1,l=1,sg=0:1
parent=11, d=2
read: 0-0-19 s=255,c=3,t=8,pt=1,l=1,sg=0:0
parent=0, d=1
send: 19-19-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:0
send: 19-19-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.4
send: 19-19-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
sensor started, id=19, parent=0, distance=1
send: 19-19-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,st=ok:Relay Outlet
send: 19-19-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 19-19-0-0 s=0,c=0,t=3,pt=0,l=0,sg=0,st=ok:
send: 19-19-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:0
send: 19-19-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.4
send: 19-19-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
sensor started, id=19, parent=0, distance=1
send: 19-19-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,st=ok:Relay Outlet
send: 19-19-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 19-19-0-0 s=0,c=0,t=3,pt=0,l=0,sg=0,st=ok:

and with libraries version 1.5.4, do you know why? what is the difference?
I see de differences in the code but i dont understand
And for more information im use de Git Repo for UI7 on my vera edge
I do not mind using an old version of the libraries, but what I was interested in was the code of a relay with button actuator.

And one more time...thank you for your help and interest

Buenas...hay alguien que hable español por aqui? soy nuevo en esto y tengo un monton de dudas...el problema es que mi ingles no es muy bueno...si alguen que hable español me puede ayudar le estaria eternamente agradecido.

Gracias...thankss:blush:

Thanks for replying, this is what I get ... I do not understand anything. I'm still learning. Can you see a bug?

My gw has the latest version, and the latest libraries also.

Hi, can anyone tell me if with these components and this code should I see it in my vera?
I'm going crazy, because my other noods work well.

thanks guys

Components:
http://www.ebay.com/itm/130977189883?rmvSB=true
http://www.ebay.com/itm/400594940658?rmvSB=true
http://www.ebay.com/itm/261099571172?rmvSB=true

Code: https://github.com/mysensors/MySensorsArduinoExamples/blob/master/examples/RelayWithButtonActuator/RelayWithButtonActuator.ino

Hi guys...Can someone tell me if the second version should work with my sensors?

Version 1
http://www.ebay.com/itm/130977189883?rmvSB=true

Version 2
http://www.ebay.es/itm/201722913123?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

i have 2 sensors with the first version and works very well, but now i by the second version and my gw dont detect my sensors.
Is there any difference

Hi guys. I have a problem with my serial gateway, i have it connected to my vera edge by usb but if i disconnect it, or i turn off my vera it loses the configurations and sometimes I have to pair all my sensors. Has anyone had this problem or know how to fix it?

I would greatly appreciate it. I like your project.

Thanks for your help.

Hello. Thanks for reply.

This is my first project witn arduino. I'm learning. xD
For this project i have:

• the vera edge;
• arduino uno;
• NRF24L01+ 2.4GHz Wireless Transceiver;
• Relays;

So my question is. It's possible wiht this components? I need another?

You say: (All of these builds are well documented on the Mysensor website.) - can you please send me de link? because i can't found.

Thank you.

Hello I would like to make the following project:

Control lights and intencidad with Vera and arduino. On, off and control its intencidad . It will be possible?
Can you help me with components and code?

Thanks guys.

Forgive my English , I'm using google translate .