I have read it. But i didn´t find the fuse on the picture. Do you have one with both fuses? I have problems to find such fuses in this dimension in Germany. For the Varistor I have find one with 120 Jule. I think it´s ok.

Do you use both, thermal fuse and the normal fuse? I can´t see it in your picture. I don´t find a normal fuse with 0,2A in Germany.

Hi,
here are my schematic and the layout. I have build also an adapter for the rfm69 modul to use with an Sensebender Micro, because I had still place enough.
https://www.file-upload.net/download-13018265/InWallPCB71RFM69.brd.html
https://www.file-upload.net/download-13018266/InWallPCB71RFM69.sch.html

Thanks,
I can upload this evening the schematic and the board. But my schematic is not so fine as yours. I didn´t find pinheaders with 2mm distance, so they are single pads.

http://www.directupload.net/file/d/5020/dyi4y337_png.htm

Hi sundberg84,
can you maybe take a look on my board. I have rebuild it so you can use it with rfm69 and NRF24 moduls. I have build an adapter, which will stand vertical behin the HLK-PM01.
But how can I upload a picture?

Or I will build an adapter.

I will try to rebuild it in eagle for RFM69. I think the space is there for an RFM69.

Is it possible to use with RFM69 modul?

Thanks, you are right.

Can anyone change the text for "Configuring MySensors for RFM69". When you want to use another pin for cs it´s not this code:

// #define RF69_SPI_CS 15 // If using a different CS pin for the SPI bus

but this

// #define My_RF69_SPI_CS 15 // If using a different CS pin for the SPI bus

I think, Blank and Xlat can´t be changed. I noticed that sensebender micro doesn´t use D9. So it´s only Blank wich is double used by tlc5940 and rfm69.

But what is with Blank and Xlat on D9 and D10.

These are the pins the TLC5940 use:

digital 3 -> TLC pin 18 (GSCLK)
- digital 9 -> TLC pin 24 (XLAT)
- digital 10 -> TLC pin 23 (BLANK)
- digital 11 -> TLC pin 26 (SIN)
- digital 13 -> TLC pin 25 (SCLK)

I think it´s not a SPI device, so I can´t use them when the RFM69 is connected.

I got wrong. They use both D9-D11 and D13.

Hi,

has anyone a solution to controll 9 duo LED´s with an sensebender micro?
I want to use a tlc5940, but they use both the pins D9-D11 and D13.

Grave

Hi,

I want to controll 9 led with sensebender micro. I want to use the tlc5940. But they use both the SCK and Mosi pin of the atmega328. Is it possible to use the tlc5940 when I sent the RFM69 to sleep? Or is there another change to use both things.

Thanks Grave

I solved the problem. I have soldered a 1000uf capacitor to the output of the step down modul. Now everything is ok.
I will try the beta Version.

Hi,

I hope, you will understand my english.

I have a sensebender micro. When I connect it only with a FTDI Programmer to watch the serial monitor, all is OK.

But when I connect it to his power source, a LM2596S step down regulator, I get this on the serial monitor:

0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
4 MCO:BGN:BFR
6 TSM:INIT
6 TSF:WUR:MS=0
14 TSM:INIT:TSP OK
16 TSF:SID:OK,ID=1
18 TSM:FPAR
55 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2064 !TSM:FPAR:NO REPLY
2066 TSM:FPAR
2103 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4112 !TSM:FPAR:NO REPLY
4114 TSM:FPAR
4151 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6160 !TSM:FPAR:NO REPLY
6162 TSM:FPAR
6199 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8208 !TSM:FPAR:FAIL
8210 TSM:FAIL:CNT=1
8212 TSM:FAIL:PDT
18216 TSM:FAIL:RE-INIT

On the gateway I get this:

0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSF:WUR:MS=0
0;255;3;0;9;TSM:INIT:TSP OK
0;255;3;0;9;TSM:INIT:GW MODE
0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
0;255;3;0;9;MCO:REG:NOT NEEDED
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.1.1
0;255;3;0;9;MCO:BGN:STP
0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
0;255;3;0;9;TSF:MSG:READ,1-1-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;TSF:MSG:BC
0;255;3;0;9;TSF:MSG:FPAR REQ,ID=1
0;255;3;0;9;TSF:CKU:OK,FCTRL
0;255;3;0;9;TSF:MSG:GWL OK
0;255;3;0;9;!TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSF:WUR:MS=0
0;255;3;0;9;TSM:INIT:TSP OK
0;255;3;0;9;TSM:INIT:GW MODE
0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
0;255;3;0;9;MCO:REG:NOT NEEDED```

I have tryid it with an 10uf capacitor. But still nothing.

Thanks Grave