Hi @tekka any update what could be wrong with the upload? Any advice on a workaround? Thanks!

Sorry @tekka, should've sent this in the first post. Here is AirQuality sensor node log: http://pastebin.com/9MVtfRNV
Here is gateway log: http://pastebin.com/QNpmBz4m
Both of them logged simultaneously. Node Id I'm updating is 1. In the log you can again see that TimeReporter is working well before the flashing. Please let me know if there is anything I can provide you with in order to solve this... Thanks!

@tekka here is the AirQualitySensor node log: http://pastebin.com/XWfFCbUx

Thanks @tekka for a prompt response!

I tried to upload https://github.com/mysensors/MySensors/blob/master/examples/AirQualitySensor/AirQualitySensor.ino
here is the log: http://pastebin.com/Tc5vhEnF
You can see that the node is successfully running with TimeReporter but AirQualitySensor cannot make it from booting. However, this is happening even with highly modified AirQualitySensor sketch or some of my custom sketches. In the log, you can also see that if I request presentation of that node it replies with correct sketch name.

Please let me know if you need some more info. Thanks in advance!

Hi @tekka and thanks for getting back to me! I tried the latest version however with no success. The node that I update is still marked as "Booting" even though I upload Blink.hex. Strangely enough, the led is blinking as it's supposed to blink and if I request presentation the node replies with correct sketch name but then it goes back to Booting. I'm using Arduino IDE 1.8.1, AVRdude v6.1 and MYScontroller v1.0.0 beta (build 3314). I'm using Arduino mini pro, 3V3, 8MHz. I have 5 different nodes but all of them with the same behavior so it does not seem as an HW issue.

Here is my log from the upload of Blink.hex: http://pastebin.com/9grgHb27 Would you have any idea how could I fix that? Thanks!

Hi @tekka, I'm having the very same issue as @Mickey so I just wanted to ask if there is any workaround to that or if happen to make the adjustment to the bootloader. Thanks a lot! Original comment

Hi guys, I'm trying to upload AirQualitySensor sketch to my Arduino Pro Mini and getting stuck at a strange situation where node is reporting it's Booting and it's sending this: http://take.ms/y69Oe It goes like that forever... If I try to upload a different sketch it all works well. I also tried to edit the sketch but the problem still remains. I tried to upload the sketch to 3 different Arduinos that work well for all my projects but no success there as well.

I'm wondering if anyone knows what the code at the end of the first message 0102 means because if the upload is successful the last message is similar to this one but with the code at the end 01010. http://take.ms/h8wx

Strangely enough if I request Presentation node response with the name from the sketch that I tried to upload - seems like just the last step - the booting - is not working.

Has anyone experienced the same problem and solved that? It would be really helpful as I'm really stuck here.

Thanks!

[0_1487715983864_MySensors_20170221-231311.log](Uploading 100%)