Posts made by legaultf

Ok so I made a new gateway with an Arduino Nano and do not have any error anymore but I can not add any devices.

I contacted the people from Vera because my serial port option is gone.

They were able to reactive it but they told me "Arduino seems to be a replica (it should use FTDI) " which probably mean I have to order new one. Are you aware of this issue ? is this a show stopper as they seem to imply.

I will probably order what I need now and in the mean time I thank you all for your help.

Kindest regards,

Francois

Major improvement with the latest version for the ui7 ! I now have the gateway being recognized.

When I press the start button it does work once after 10 tries and then I get the following

your help as got me this far thank you again I feel that I am making progress

I just made some progress

I now have the start stop control. I did not initially uploaded the .json file. Now I made sure I have the following d_arduino1.xml, d_arduino1.json, d_arduinorelay1.xml & json

any idea why I can not pair any device or have a screen similar to yours showing the gateway ?

Please find below the config screen for my device.

Could you either copy paste your configuration screens or tell me what is not set properly ?

Your help is greatly appreciated

Francois

I see all the devices but none have any controls. Does that mean they are not properly configured ?

I have tested the hardware succesfully connecting the serial gateway on com5 and having a remote relay not connected to the computer with a led. I can turn the led wirelessly on and off wiht MYSController.

I have then connected the serial USB to the VeraEdge and with some help from Vera managed to activate and configure the serial port.

Here is the vera config for the serial port

Serial Port configuration
If you connected the USB/serial device and it's not displayed here, reload Luup.Reload Luup
Name: ftdi_sio Path: /dev/ttyUSB0
Device number: usb-101c1000.ohci-1
IP address: Port: 3481
Baud: 115200 Parity: none
Data bits: 8 Stop bits: 1
Used by device: MySensors Plugin [Living Room]

At that stage I tried paring by pressing the pairing button on the Vera edge and resetting my sensor without succes.

I the proceeded on creating a new device in the vera develop apps/Create device.

this one I created a standard d_arduinoRelay1.xml as a child of the MySensors Plugin

I then tried to discover my sensor without success.

My next step maybe to add an ethernet gateway and see if the issue come from the serial interface on the vera.

Hopefully you will see something I am doing wrong.

Thank you

Francois

Thank you for your reply.

Here is what I get when I connect my gateway to my computer monitor and I reset my relay

0;0;3;0;14;Gateway startup complete.
0;0;3;0;9;read: 19-19-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
19;255;0;0;17;1.4.1
0;0;3;0;9;read: 19-19-0 s=255,c=3,t=6,pt=1,l=1:0
19;255;3;0;6;0
0;0;3;0;9;read: 19-19-0 s=255,c=3,t=11,pt=0,l=12:Relay Outlet
19;255;3;0;11;Relay Outlet
0;0;3;0;9;read: 19-19-0 s=255,c=3,t=12,pt=0,l=3:1.0
19;255;3;0;12;1.0
0;0;3;0;9;read: 19-19-0 s=0,c=0,t=3,pt=0,l=5:1.4.1
19;0;0;0;3;1.4.1

I concluded that my sensor / gateway pair is working correctly.

Should it be dectected by the veraedge when I press pairing and reset the Relay Outlet ?

I try creating a new device and associate the D_ArduinoRelay1.xml file to it but I never get an on/off button associated with the device I created.

Francois

I have just unboxed my new vera edge manage to upgrade so that it recognize the usb uno gateway.

I can not get the sensor to be recognized. I press the button on the side and reset the sensor I know that it send sucessfully to the gateway having tested it on a computer.

So the question now is what am i doing wrong. Should I creat a new device with the D_arduinoRelay1.xml file?

Can someone tell me what I am doing wrong and point me in the right direction

Tks

I just purchased a veraedge and manage to get the usb gateway to be recognized. Unfortunatly I do not know how to get my sensors to be recognized. Inhave tried the discover button followed by a reset of the sensor without succes. I have also tried to create a new device with the dArduino1.xml but can not get this configured with my device.

So after reading everything I could find on the topic I am desperate to find a solution with the vera edge or an another controller that could work as stand alone or on a pc.