Hi, Any news on that? If needed I can help developping.
Posts made by Lorenzo
-
RE: MYSBootloader 1.3pre2 testing
@Tigroenot Hi,
TSM Transmission
TSP Transport
PDT Power Down!TSM:INIT:TSP FAIL Error during Transport initialization (Radio)
TSM:FAILURE Error on Transmition (of course, you have a radio error)
TSM:FAILURE:PDT Radio in Power Down (due to the error)Check your radio cabling. If all ok add a capacitor on radio power pins
-
RE: MYSBootloader 1.3pre2 testing
Hi, thank for the great work.
I also use a different Channel, in fact I have 3 area with 3 differents Channels.
Do you have a plan about source code release date ? -
RE: MYSBootloader 1.4 testing
@tekka
Thank for your answer. But actually my setup use Mysensor library 2.0.1. So what about MYSBootloader 1.1 and Gateway using Mysensor 2.0.1?
And as Rickard say, the serial Bootloading is also a must.Lorenzo
-
RE: MYSBootloader 1.4 testing
@tekka
Hi Tekka, just to understand, the new release of MYSBOOTLOADER you are working on is 1.3 or 1.4?
Are source of one release available, even in beta?I have a setup with ~20 nodes ready to start, but I need an OTA Bootloader, no signing required.
If you already worked on that, it's a pitty to develop my own Bootloader.Thank for all your time spend on that project and hope we can enjoy using your MYSBOOTLOADER
Lorenzo
-
RE: MYSBootloader 1.3 pre-release & MYSController 1.0.0beta
@tekka
Hi, thank for your quick answer. Yes software are never finalized
Even a beta release can be ok to me in order to start testing the new setup.
I will start with some micro pro 3.3V 8MHz external quartz.
Also if I can help in coding or debugging, happy to help. I spend lot of time programming AVR. Please don't hesitate, ask (PM).
In any case up to you to decide when starting publishing the first release.Thank for your job and looking forward to test the bootloader
-
RE: MYSBootloader 1.3 pre-release & MYSController 1.0.0beta
@tekka
Hi tekka, are the source already available. I'm moving all my setup to mysensor 2.0.1 so your new bootloader is very interesting.
But on my setup I need a small customization.
I have 3 areas with 3 GW and each area with a different RF channel.
So I add a configuration switch to my nodes to select the channel.
I already modified the mysensor Library for this feature.
That why I'm asking for source code, in order to add this on bootloader too.Thank and nice job