sure:
#define Ver 2.0
#include <EEPROM.h>
// ver 2.0 range 0 through 255
// ------------------------------------------------------------------------------------clearSerialBuffer
void clearSerialBuffer(){
while(Serial.available()){
Serial.read();
delay(50);
}
}
// ------------------------------------------------------------------------------------header
void header(){
uint8_t EEpromInt = EEPROM.read(0);
Serial.print(F("Current value at address (0) is "));
Serial.println(EEpromInt);
clearSerialBuffer();
Serial.print(F("Enter a an unsigned integer >=0 and <=255: "));
}
// ------------------------------------------------------------------------------------setup
void setup() {
Serial.begin(115200); Serial.print(F("\n\rAddress As uint8_t ver ")); Serial.println(Ver);
clearSerialBuffer();
header();
}
// ------------------------------------------------------------------------------------loop
void loop() {
if (Serial.available()){
long inInt = Serial.parseInt();
if (inInt <0 || inInt >255){
Serial.print(F(" I don't like '"));
Serial.print(inInt);
Serial.println(F("'"));
}
else {
EEPROM.write(0,uint8_t(inInt));
}
header();
}
}
