Posts made by MrVince

I try 2 power supplies, and I put the radio far away from it.

And I use a decoupling capacitor like says in "Connecting the radio" page

I don't understand what happend wrong with the log, can you explain me? Thank's

Oh, when I plug a nano on computer with USB the GW connect without problem

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 *
 * DESCRIPTION
 * Example sketch showing how to control physical relays.
 * This example will remember relay state after power failure.
 * http://www.mysensors.org/build/relay
 */

// Enable debug prints to serial monitor
#define MY_DEBUG

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_NRF5_ESB
//#define MY_RADIO_RFM69
//#define MY_RADIO_RFM95

// Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

#include <MySensors.h>

#define RELAY_PIN 4  // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
#define NUMBER_OF_RELAYS 2 // Total number of attached relays
#define RELAY_ON 1  // GPIO value to write to turn on attached relay
#define RELAY_OFF 0 // GPIO value to write to turn off attached relay


void before()
{
    for (int sensor=1, pin=RELAY_PIN; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
        // Then set relay pins in output mode
        pinMode(pin, OUTPUT);
        // Set relay to last known state (using eeprom storage)
        digitalWrite(pin, loadState(sensor)?RELAY_ON:RELAY_OFF);
    }
}

void setup()
{

}

void presentation()
{
    // Send the sketch version information to the gateway and Controller
    sendSketchInfo("Relay", "1.0");

    for (int sensor=1, pin=RELAY_PIN; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
        // Register all sensors to gw (they will be created as child devices)
        present(sensor, S_BINARY);
    }
}


void loop()
{

}

void receive(const MyMessage &message)
{
    // We only expect one type of message from controller. But we better check anyway.
    if (message.type==V_STATUS) {
        // Change relay state
        digitalWrite(message.sensor-1+RELAY_PIN, message.getBool()?RELAY_ON:RELAY_OFF);
        // Store state in eeprom
        saveState(message.sensor, message.getBool());
        // Write some debug info
        Serial.print("Incoming change for sensor:");
        Serial.print(message.sensor);
        Serial.print(", New status: ");
        Serial.println(message.getBool());
    }
}```

Hi everyone

I've build a relay to control my Senseo. All seems ok, I power the arduino/relay with a 5V transfo from USB charger, all seems ok, my arduino was add by the GW, but i can't send order to it.

See below my log

Tue Jan 09 2018 14:06:48 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:READ,5-5-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
Tue Jan 09 2018 14:06:48 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:BC
Tue Jan 09 2018 14:06:48 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:FPAR REQ,ID=5
Tue Jan 09 2018 14:06:48 GMT+0100 (CET) : 0;255;3;0;9;TSF:CKU:OK,FCTRL
Tue Jan 09 2018 14:06:48 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:GWL OK
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;!TSF:MSG:SEND,0-0-5-5,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:0
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;TSM:INIT
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;TSF:WUR:MS=0
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;TSM:INIT:TSP OK
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;TSM:INIT:GW MODE
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;MCO:REG:NOT NEEDED
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;14;Gateway startup complete.
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;0;0;18;2.1.1
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;MCO:BGN:STP
Tue Jan 09 2018 14:06:49 GMT+0100 (CET) : 0;255;3;0;9;MCO:BGN:INIT OK,TSP=1

Oh, and when I send a request, I see that :

Tue Jan 09 2018 16:48:38 GMT+0100 (CET) : 5;1;1;1;2;1
Tue Jan 09 2018 16:48:39 GMT+0100 (CET) - Server connected
Tue Jan 09 2018 16:48:39 GMT+0100 (CET) - Response: 5;1;1;1;2;1
Tue Jan 09 2018 16:48:39 GMT+0100 (CET) - Connexion closed
Tue Jan 09 2018 16:48:39 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:SEND,0-0-5-5,s=1,c=1,t=2,pt=0,l=1,sg=0,ft=0,st=OK:1
Tue Jan 09 2018 16:48:39 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:READ,5-5-0,s=1,c=1,t=2,pt=0,l=1,sg=0:1
Tue Jan 09 2018 16:48:39 GMT+0100 (CET) : 0;255;3;0;9;TSF:MSG:ACK

Thanks for your help, and happy new year

@gohan ok

I understand for the controller, but I think I miss something about the ID_RESPONSE

Imagine this situation:

I have just one sensor with no ID
The GW send me (the controller) : '255;255;3;0;3;' // Sensor want a node_ID
If I want to give it the ID 1, what I need to send to the gw? I think something like '255;255;3;0;4;1', that's right?

EDIT : I try and it's work now, but I need to clear EEPROM first

Hi everyone !

Let's do a check up :

• Read from a GW in serial connection : ok
• Read information when I give a static ID : ok
• Find a node who want an ID : ok
• Give an ID to a node with my controller : nope

So, the question is, if I receive '255;255;3;0;3;' my controller understand it's an ID_REQUEST and I need to use an ID_RESPONSE, but if I want to give an ID I need to build something like this :

node-id ; child-sensor-id ; command ; ack ; type ; payload

node-id : ??
child-id : ??
command : 3 for internal
ack : 0 ?
type : 4 for response
payload : new ID (ex: 101)

What are the node-id & child-id if the sensor doesn't have one?

One more time, I want to thank's all of you, with your help it's more easier to understand and I start to see the end !

EDIT : One more thing, I have an idea. I want to open a pop-up when a new sensor is on to choose for wich room is it.
Can I give an temporary ID (like 254), wait for a first message with ID 254, with a first message I can see what type of sensor is, open a pop up, and give a new ID after I choose the room?

Hi ! Thank's for working
I add the libraries in "MySensors external examples" to Arduino IDE but when I want to compile I have this one log error :

DhtTemperatureAndHumiditySensor.ino:43:25: fatal error: MySensors.h: No such file or directory
compilation terminated.

In MySensors folder's libraries, I have a MySensor.h, without 's' . This is one? Do I forget something?

Thanks

@sundberg84 It's work ! Thank you

Ok, if I right, there is a trouble with a motionsensor who want an ID ?

Do I need to give it one, or it's done by a gateway?

Hy everyone ! So, THIS IS WORKING ! Thanks a lot

Now, new problemes ! (It's not funny without)

I build a serial gateway and a motionsensor

This is my log

image url)

0;0;3;0;9 -> ok it's a gateway init
0;0;3;0;14 -> gateway is ready

but, what is the next one? Normally I will receive just x;x;x;x;x; right? what's about read: 255-255....

Thank you

@scalz I will look thanks

@mfalkvidd Thanks for the welcome !

I already look and studies the API. I understand a format and how build a Message but not how send it to my gateway.

I've look this https://developer.microsoft.com/en-us/windows/iot/docs/wra on MSDN to connect an Arduino to a Raspberry, but there is something I can't understand. Do I need to create a string with a good format and send it to gateway? If yes, how, and if not, what I need to do.

Maybe it's obvious and there is something I can't understand, I'm sorry if it's that

EDIT : One more thing about the API, it's to the Arduino right?

Hi everyone !

For my studies, I choose to create a "home monitoring" project. My project need to request a many informations like temperature, .. via a gateway using mysensor API. My controller need to be on Windows IoT (C#) and I need to write all the informations in database. So, everything is good except one thing.

After searching a looooong time i'm blocked !

I want to create my own controler working on Rpi with IoT (C#) but I don't know how send message to my gateway in serial USB. I found nothing about how to send request.

I want to know how send request from my controller to my gateway. I can use an external API to do that, but I don't know what ><

Please, someone can help me?

Thank you

PS : Sorry if my english is too bad, I'm a french guy !