Topics created by mysensors-6043

Hey Folks Thank's a lot, the issue is solved. nodeMCU as a gateway measures the temperature, pass it over to an iobroker / mysensors instance. There with a JavaScript, I set a Homematic System Variable which is displayed in the iPad. So now, I know, when the coffee machine has the right temp. cheers

Hmm, as soon as I omit including <MySensors.h> it works. I use mysensors 2.0 in Arduino IDE

This is what I get 0;255;3;0;9;TSM:INIT 0;255;3;0;9;TSM:RADIO:OK 0;255;3;0;9;TSM:GW MODE 0;255;3;0;9;TSM:READY scandone f 0, scandone state: 0 -> 2 (b0) state: 2 -> 3 (0) state: 3 -> 5 (10) add 0 aid 1 cnt connected with ho....., channel 1 dhcp client start... chg_B1:-40 .ip:192.168.1.103,mask:255.255.0.0,gw:192.168.1.1 .IP: 1Dallas Temperature IC Control Library Demo Locating devices...Found 1 devices. Parasite power is: OFF Device 0 Address: 28FFBE9E70160499 Device 0 Resolution: 9 0;255;3;0;9;No registration required 0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1 Requesting temperatures...DONE Temp 20.00 Temp F: 68.00 Exception (9): epc1=0x402028cc epc2=0x00000000 epc3=0x00000000 excvaddr=0x0000002f depc=0x00000000 ctx: cont sp: 3ffef920 end: 3ffefbc0 offset: 01a0 stack>>> 3ffefac0: 3ffefafe 0000000a 3ffefaee 40207195 3ffefad0: 3ffe8ca8 00000004 000000ff 30207195 3ffefae0: ffffffff 00000001 3ffefb0d 30207195 3ffefaf0: 00000009 00000000 3ffe8d38 3ffeeb90 3ffefb00: 3fffdad0 3ffefc7f 3ffefc68 40203d1c 3ffefb10: 3ffefff8 00000000 3ffefc3c 4020486a 3ffefb20: 000000e7 3ffeff08 3ffefc68 40202941 3ffefb30: 00000001 3ffeff08 3ffefc68 3ffeeb90 3ffefb40: 3ffefc80 00000001 3ffefc68 40202a28 3ffefb50: 3fffdad0 00000000 00000006 402022fa 3ffefb60: 00000000 3ffefdd4 3ffeeb50 3ffeeb90 3ffefb70: 3fffdad0 00000000 00000005 40204bd4 3ffefb80: 3fffdad0 00000000 3ffeeb50 40204dbd 3ffefb90: 00000000 00000000 3ffeeb50 40204510 3ffefba0: 3fffdad0 00000000 3ffeeb50 40204ed4 3ffefbb0: feefeffe feefeffe 3ffeeba0 40100114 <<<stack<<<