Yes, I' am. Still to understand the needs in terms of sensors, gw and so on...
Never used before mysensor, but i've got 4 sensordend boards.
I should be able to setup a gw with nrf+ in a raspberry 2.

Roberto Brunialti
@Roberto Brunialti
Posts made by Roberto Brunialti
-
RE: Freedomotic
-
RE: MySensors Sensebender Micro 3DP Case
Just a check: does'nt the micro have a capacitor on the pcb to serve the radio? So is it really necessary to stick the huge cap on top of radio ?
-
RE: 110v-230v AC to Mysensors PCB board
Those are even much smaller (3.3v , 25x38x17 mm , 3w) and have similar price. I've got one (still to experiment with)
-
RE: Freedomotic
Hi, what about the mysensor plugin? I would like to try the freedomotic frontend with raspberrypi as a (serial)gateway. Are there any tutorials about?
thanks -
RE: [Tutorial] Raspberry Pi NRF24l01 direct connection
Ok. It seems the gateway is working as i get the same final screen when I run it. But... does it has a verbose mode? How can I know If it is working? I tried with a test node, unfortunately it seems not working ... or simply it does'nt give any feedback...
-
RE: Creating a Blind/Roller Shutter like Fibaro FGR221
Any practical experience with Fibaro in mysensors environment?
-
RE: [Tutorial] Raspberry Pi NRF24l01 direct connection
An other silly question: can I install a controller into the same raspberry pi (the one with this gateway and nrf )? Are all controllers suitable for such a configuration ?
Thanks! -
RE: How do I access Mysensors Cloud
In theory the controller could be placed on Cloud, allowing to be accessed remotely is'nt it? What about intrinsic security communications between gw and controller?
-
RE: [Tutorial] Raspberry Pi NRF24l01 direct connection
Sorry for my naive question: does it means I ca use a raspi as a nrd24l01 based gateway?
-
RE: Creating a Blind/Roller Shutter like Fibaro FGR221
Did you have any further experience/information about roller shutter in mysensors environment to share ? It is quite an hot point for me...