Gateway not working on VeraLite + UI6 - No Serial Port configuration available
-
Hi,
I built my gw using a nano (bought the one recommended on this site) many months ago. It worked for a while, but then I unplugged it from my Vera Lite (running UI6) as my sensors weren't fully operational yet (had some battery issues).
Now that I have some time, I tried getting the gw to work again, and when I follow the instructions on the page http://www.mysensors.org/controller/vera, I keep seeing the "Lua Startup Failure" error on the device page. When I go to set the serial port, I get the "Not available." message on the "Set Serial Configuration" page in the Apps section.
I SSH into the vera as the remote user to tail some logs (/tmp/log/cmh/LuaUPnP.log) and when I reload Lua, I see the following log entries relevant to the gw device (#37):
09 02/22/15 12:11:02.086 JobHandler_LuaUPnP::Run device 37 MySensors Plugin room 0 type urn:schemas-arduino-cc:device:arduino:1 id parent 0/0xd34670 upnp: 0 <0x2b92d000> 50 02/22/15 12:11:04.228 luup_log:37: Arduino plugin: loading library L_Arduino ... <0x2c261680> 50 02/22/15 12:11:04.289 luup_log:37: Arduino plugin: library L_Arduino loaded __LEAK__ this:40960 start:40960 to 0xf9b000 <0x2c261680> 50 02/22/15 12:11:04.300 luup_log:37: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,PluginVersion, 1.4, 37 <0x2c261680> 50 02/22/15 12:11:04.300 luup_log:37: Arduino: Trying for a serial connection <0x2c261680> 01 02/22/15 12:11:04.301 luup_log:37: Arduino: Serial port not connected. First choose the serial port and restart the lua engine. <0x2c261680> 01 02/22/15 12:11:04.301 luup_log:37: Arduino: Choose the Serial Port <0x2c261680> 01 02/22/15 12:11:04.302 LuaInterface::CallFunction_Startup-2 device 37 function startup failed (null) with return false <0x2c261680> 01 02/22/15 12:11:04.302 LuImplementation::StartLua running startup code for 37 I_Arduino1.xml failed <0x2c261680>So it seems it loads the library fine, but something goes wrong and it fails. Just to make sure my nano is still working, I uploaded the blink sketch, and that worked.
I also tried, as someone suggested in this forum, to use a powered hub (as opposed to plugging the nano directly into the VeraLite - same result.
Anyone had a similar issue and found a way to resolve it? I saw someone else in this forum had better luck with a legit Nano ($$$), I am hoping I don't have to do that ;-)
Thanks in advance!
-
Hi,
I built my gw using a nano (bought the one recommended on this site) many months ago. It worked for a while, but then I unplugged it from my Vera Lite (running UI6) as my sensors weren't fully operational yet (had some battery issues).
Now that I have some time, I tried getting the gw to work again, and when I follow the instructions on the page http://www.mysensors.org/controller/vera, I keep seeing the "Lua Startup Failure" error on the device page. When I go to set the serial port, I get the "Not available." message on the "Set Serial Configuration" page in the Apps section.
I SSH into the vera as the remote user to tail some logs (/tmp/log/cmh/LuaUPnP.log) and when I reload Lua, I see the following log entries relevant to the gw device (#37):
09 02/22/15 12:11:02.086 JobHandler_LuaUPnP::Run device 37 MySensors Plugin room 0 type urn:schemas-arduino-cc:device:arduino:1 id parent 0/0xd34670 upnp: 0 <0x2b92d000> 50 02/22/15 12:11:04.228 luup_log:37: Arduino plugin: loading library L_Arduino ... <0x2c261680> 50 02/22/15 12:11:04.289 luup_log:37: Arduino plugin: library L_Arduino loaded __LEAK__ this:40960 start:40960 to 0xf9b000 <0x2c261680> 50 02/22/15 12:11:04.300 luup_log:37: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,PluginVersion, 1.4, 37 <0x2c261680> 50 02/22/15 12:11:04.300 luup_log:37: Arduino: Trying for a serial connection <0x2c261680> 01 02/22/15 12:11:04.301 luup_log:37: Arduino: Serial port not connected. First choose the serial port and restart the lua engine. <0x2c261680> 01 02/22/15 12:11:04.301 luup_log:37: Arduino: Choose the Serial Port <0x2c261680> 01 02/22/15 12:11:04.302 LuaInterface::CallFunction_Startup-2 device 37 function startup failed (null) with return false <0x2c261680> 01 02/22/15 12:11:04.302 LuImplementation::StartLua running startup code for 37 I_Arduino1.xml failed <0x2c261680>So it seems it loads the library fine, but something goes wrong and it fails. Just to make sure my nano is still working, I uploaded the blink sketch, and that worked.
I also tried, as someone suggested in this forum, to use a powered hub (as opposed to plugging the nano directly into the VeraLite - same result.
Anyone had a similar issue and found a way to resolve it? I saw someone else in this forum had better luck with a legit Nano ($$$), I am hoping I don't have to do that ;-)
Thanks in advance!
-
Hi,
I built my gw using a nano (bought the one recommended on this site) many months ago. It worked for a while, but then I unplugged it from my Vera Lite (running UI6) as my sensors weren't fully operational yet (had some battery issues).
Now that I have some time, I tried getting the gw to work again, and when I follow the instructions on the page http://www.mysensors.org/controller/vera, I keep seeing the "Lua Startup Failure" error on the device page. When I go to set the serial port, I get the "Not available." message on the "Set Serial Configuration" page in the Apps section.
I SSH into the vera as the remote user to tail some logs (/tmp/log/cmh/LuaUPnP.log) and when I reload Lua, I see the following log entries relevant to the gw device (#37):
09 02/22/15 12:11:02.086 JobHandler_LuaUPnP::Run device 37 MySensors Plugin room 0 type urn:schemas-arduino-cc:device:arduino:1 id parent 0/0xd34670 upnp: 0 <0x2b92d000> 50 02/22/15 12:11:04.228 luup_log:37: Arduino plugin: loading library L_Arduino ... <0x2c261680> 50 02/22/15 12:11:04.289 luup_log:37: Arduino plugin: library L_Arduino loaded __LEAK__ this:40960 start:40960 to 0xf9b000 <0x2c261680> 50 02/22/15 12:11:04.300 luup_log:37: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,PluginVersion, 1.4, 37 <0x2c261680> 50 02/22/15 12:11:04.300 luup_log:37: Arduino: Trying for a serial connection <0x2c261680> 01 02/22/15 12:11:04.301 luup_log:37: Arduino: Serial port not connected. First choose the serial port and restart the lua engine. <0x2c261680> 01 02/22/15 12:11:04.301 luup_log:37: Arduino: Choose the Serial Port <0x2c261680> 01 02/22/15 12:11:04.302 LuaInterface::CallFunction_Startup-2 device 37 function startup failed (null) with return false <0x2c261680> 01 02/22/15 12:11:04.302 LuImplementation::StartLua running startup code for 37 I_Arduino1.xml failed <0x2c261680>So it seems it loads the library fine, but something goes wrong and it fails. Just to make sure my nano is still working, I uploaded the blink sketch, and that worked.
I also tried, as someone suggested in this forum, to use a powered hub (as opposed to plugging the nano directly into the VeraLite - same result.
Anyone had a similar issue and found a way to resolve it? I saw someone else in this forum had better luck with a legit Nano ($$$), I am hoping I don't have to do that ;-)
Thanks in advance!
-
Im using the serial gateway on u17 and have it working fine. i have the same problem as you when my vera is rebooted or powered off, but found 2 solutions. 1 with the vera on disconnect then reconnect the serial gateway. wait 10seconds refresh the dashboard page. Then go to app/ developer apps/ serial connection. Reset your baud rate to 115200?? Select the mysensors profile. Then reload luup.pls note Sometimes it takes a few retrys. And doesn't always detect serial connection just be persistent. Option 2 when you get it working create a complete vera backup on your phone or pc. restore backup when needed
-
Failing that delete the mysensor gateway. Then reinstall D_Arduino1.xml. Re-add nodes as per usual.
-
Just read that link above lol. Could of saved me alot of writing on a phone. Good luck
-
-
Im using the serial gateway on u17 and have it working fine. i have the same problem as you when my vera is rebooted or powered off, but found 2 solutions. 1 with the vera on disconnect then reconnect the serial gateway. wait 10seconds refresh the dashboard page. Then go to app/ developer apps/ serial connection. Reset your baud rate to 115200?? Select the mysensors profile. Then reload luup.pls note Sometimes it takes a few retrys. And doesn't always detect serial connection just be persistent. Option 2 when you get it working create a complete vera backup on your phone or pc. restore backup when needed
@brettzky84 said:
Im using the serial gateway on u17 and have it working fine. i have the same problem as you when my vera is rebooted or powered off, but found 2 solutions. 1 with the vera on disconnect then reconnect the serial gateway. wait 10seconds refresh the dashboard page. Then go to app/ developer apps/ serial connection. Reset your baud rate to 115200??...
Thansk. I ended up upgrading to the latst UI7 beta. My gateway is now working!!! Let's see how stable it is. ;-)
(UI7 has fixed some of my other issue too)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login