Arduino NRF24L01 simple universal board
-
Today completed the universal wiring boards connected devices smart home.
According to my idea to add the device need to buy:- Arduino Pro Mini
- Nordic (NRF24L01)
- Sensors (dht22 1pc, ds18b20 up to 16 pieces per unit) and relay switch 2 channels.
- a box
- AC-DC to 5v 700mA
- Buttons 2 pcs
- PCB
Further, all connected, put in to box and enjoy the new device.
Board 50x50 mm.
-
Is there somewhere on seeedstudio where I can order some? looks nice! Or is there other similar mini and radios integrated products?
-
@shabba i have a similar integrated product much smaller in size. You may message me if you are interested!
@vikasjee said:
i have a similar integrated product much smaller in size. You may message me if you are interested!
Could you please give some more information and share the design files?
This is your first post here on the forum and we will be extra picky on you to keep spam out. If you want to promote a product we will require it to be open hardware and you should contact info@mysensors.org for further instructions.
-
@shabba also have a look at http://www.mysensors.org/hardware/
-
@vikasjee said:
i have a similar integrated product much smaller in size. You may message me if you are interested!
Could you please give some more information and share the design files?
This is your first post here on the forum and we will be extra picky on you to keep spam out. If you want to promote a product we will require it to be open hardware and you should contact info@mysensors.org for further instructions.
@hek said:
@vikasjee said:
i have a similar integrated product much smaller in size. You may message me if you are interested!
Could you please give some more information and share the design files?
This is your first post here on the forum and we will be extra picky on you to keep spam out. If you want to promote a product we will require it to be open hardware and you should contact info@mysensors.org for further instructions.
Sure! Am sorry didnt know about that. Will contact info@mysensors.org for instructions.
-
There is a trick.
Arduino pro mini you can always pull out and replace prereproshit. For example, you can take out and do it with low power consumption and frequency of 1 MHz.For me it is important that the board did not have anything extra. Everything else is a module connects to the motherboard.
Here are photos of how I put together in a box:
![2015-02-23%2B21.36.23[1].jpg](/uploads/upload-360c6b81-2681-4d08-ba14-51db78c17b5d.jpg)
-
There is a trick.
Arduino pro mini you can always pull out and replace prereproshit. For example, you can take out and do it with low power consumption and frequency of 1 MHz.For me it is important that the board did not have anything extra. Everything else is a module connects to the motherboard.
Here are photos of how I put together in a box:
-
Have you noticed any range reduction or orientation sensitivity from putting the antenna over a PCB plane?
