Code Garage to the rescue.
-
I hope the project won't be buried due to the fact that the protocol is the basis of nippy devices (https://nippysmart.com/) I also hope that the development of mysensors won't be directed in 2 directions - one commercial only for nippy - the other for all the rest, which could result in the two versions diverging so much that they will be incompatible and the second one will simply be buried.
-
Thank you @CodeGarage , you really thrive !
As for the suggestions, i would say most important point would be to look at the project code base.
I guess the development branch has quiet evolved since the 2.3.2 release.Next would be to sort the features and decide a roadmap for mysensors because the project can live only if it evolves
Long live MySensors!
-
Thank you @CodeGarage , you really thrive !
As for the suggestions, i would say most important point would be to look at the project code base.
I guess the development branch has quiet evolved since the 2.3.2 release.Next would be to sort the features and decide a roadmap for mysensors because the project can live only if it evolves
Long live MySensors!
@hlehoux As I understand the limitation of the packet size is by the NRF radio. Maybe stop supporting NRF, so that we can get a bit bigger packet size. That would help my current project where I'm using MySensors as a transport layer. I know that is easier with wifi. But I want to use mysensors.
Never mind: If I hexify everything, I can squeeze in all I need so far.
-
@hlehoux As I understand the limitation of the packet size is by the NRF radio. Maybe stop supporting NRF, so that we can get a bit bigger packet size. That would help my current project where I'm using MySensors as a transport layer. I know that is easier with wifi. But I want to use mysensors.
Never mind: If I hexify everything, I can squeeze in all I need so far.
-
@TheoL I wish nRF will be supported for longer time. Maybe just be free to specify the payload lenght instead ?
But I am with you on wishing for MySensors protocol over wifi with extendable lenght.
@fsgraz As an alternative to MySensors using the nRF24 radio, look at the work that tmrh20 has done. I have used this code and found it works well enough. It's lower level than MySensors. I haven't tried to connect it to Home Assistant, but I think a determined person could make this happen.
I would say it doesn't have the support that MySensors ha,s being only one person, but there isn't much support here anymore. :(
-
@CodeGarage I am getting the message that www.mysensors.org is not responding (13h22 PDT 8 Aug 25) Is MySensors officially dead?
-
@CodeGarage I am getting the message that www.mysensors.org is not responding (13h22 PDT 8 Aug 25) Is MySensors officially dead?
