st=fail on reboot
-
Hi there,
For some reasons I have to send a reboot request to one of my node (with id:1).When I send this message from my controller:
1;255;3;0;13;
I got this log from the GW :
0;0;3;0;9;send: 0-0-1-1 s=255,c=3,t=13,pt=0,l=0,st=fail:
And I don't have the expected reboot on node #1.What st=fail: means ?
Any idea that can block the node from rebooting ?Thx,
G. -
Was the node awake and listening? st=fail means transmission to that node failed (no "ok" back).
If it's battery powered, it's probably sleeping with radio off.
One trick seen in another thread; after the node has sent data to the gateway, listen for like 200ms for any incoming packets. In the controller; keep the reboot packet on hold until you hear from the node - then quickly send it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login