How to update sensor relay from serial gateway

[beanl]

tried :

echo "1;1;1;0;2;1" >> /dev/ttyUSB0

without success :(

[beanl]

I also tried using node.js ...

I check if i receive serial data on my gateway using :

bash> picocom /dev/ttyUSB1 -b 115200 -r -l --omap lfcrlf --imap lfcrlf --emap lfcrlf
Terminal ready
send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=3,sg=0,st=ok:1.5
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
repeater started, id=1, parent=0, distance=1
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=ok:Relay
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 1-1-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok:

Here is my node.js script :

const gwType = 'Serial';
//const gwPort = 'COM4';
const gwPort = '/dev/ttyUSB0';
const gwBaud = 115200;

//var SerialPort = require('/home/bxl/node-v0.12.0-linux-x64/lib/node_modules/serialport');
var serialport = require('/home/bxl/node-v0.12.0-linux-x64/lib/node_modules/serialport');
var SerialPort = serialport.SerialPort;


gw = new SerialPort(gwPort,
        { baudrate: gwBaud
          ,parser: serialport.parsers.readline("\n")
});

            gw.on('open', function() {
                        console.log('connected to serial gateway at ' + gwPort);
                        gw.write('1;1;1;0;2;1');
                        console.log('Write done.');
                }).on('end', function() {
                        console.log('disconnected from gateway');
                }).on('error', function() {
                        console.log('connection error - trying to reconnect');
                        gw.open();
                });

but nothing move on my serial gateway :(

[hek]

@beanl said:

gw.write('1;1;1;0;2;1');

Does not att newline (I think?)...

[beanl]

I also try to put my gateway on a widows machine and on arduino ide :

I send : 1;1;1;0;2;1

But on my node :

bash>  picocom /dev/ttyUSB1 -b 115200 -r -l --omap lfcrlf --imap lfcrlf --emap lfcrlf
picocom v1.7

port is        : /dev/ttyUSB1
flowcontrol    : none
baudrate is    : 115200
parity is      : none
databits are   : 8
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : yes
nolock is      : yes
send_cmd is    : sz -vv
receive_cmd is : rz -vv
imap is        : lfcrlf,
omap is        : lfcrlf,
emap is        : lfcrlf,

Terminal ready
send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=3,sg=0,st=ok:1.5
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
repeater started, id=1, parent=0, distance=1
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=fail:Relay
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 1-1-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok:

[hek]

What does "Pas de fun de ligne" mean?

[korttoma]

@hek acording to google translate "No end of line"

[beanl]

yep it's the french version of arduino IDE :)

[hek]

Choose the option where it sends newlines then...

[beanl]

i try with the option without success.

I also try to reset EEPROM & assigning Node ID with "MYScontroller" :

On my node :

Terminal ready
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=fail:
repeater started, id=255, parent=0, distance=1
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:

I think my gateway don't really send message ...
Any idea why ?

[beanl]

I used a mini pro whith FTDI :

It wasn't working the serial gateway don't send data.

I test with a nano and all is ok now ...

And on my relay sensor :

Terminal ready
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
read: 0-0-255 s=255,c=3,t=4,pt=0,l=1,sg=0:1
send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=3,sg=0,st=ok:1.5
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-1 s=255,c=3,t=6,pt=0,l=1,sg=0:M
id=1
send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=3,sg=0,st=ok:1.5
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-1 s=255,c=3,t=6,pt=0,l=1,sg=0:M
repeater started, id=1, parent=0, distance=1
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=ok:Relay
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 1-1-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok: