Gateway Ready message with sensor id 0 [V 1.6 beta]

[jkandasa]

I'm getting gateway ready message as 0;0;3;0;9;Starting gateway (RNNGA-, 1.6.0-beta)

Here nodeId and sensorId shows as 0, I believe sensorId should be 255?

[mfalkvidd]

The gateway always has nodeid 0

[jkandasa]

@mfalkvidd said:

The gateway always has nodeid 0

@mfalkvidd I'm fine with nodeId, but sensorId should be 255 right? It should not be 0. As we can assign 0 to some other sensor.

[mfalkvidd]

Sorry about that. I believe you can use child-sensor-id 0 for any sensor that is not a gateway. Since any other child sensor will have a different node id, there will be no collision.

[jkandasa]

@hek For internal message gateway device using sensor id 0. I hope it should be 255.
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0

[hek]

Yes, internal messages uses sensor-id 255.

[jkandasa]

@hek said:

Yes, internal messages uses sensor-id 255.

but I'm getting sensor-id 0 for internal messages

For now I have identified for I_GATEWAY_READY and I_LOG_MESSAGE

[hek]

That's plain wrong. Created a PR here:

https://github.com/mysensors/Arduino/pull/316

[jkandasa]

@hek said:

That's plain wrong. Created a PR here:

https://github.com/mysensors/Arduino/pull/316

Thank you @hek !!